EDIFIER Neobuds S Manual | Step-by-step Guide 2022

The EDIFIER Neobuds S have Snapdragon Sound technology, gaming mode, Bluetooth 5.2 with aptX/aptX-Adaptive, the IP54 certification, a battery life of about 5.5 to 6 hours, -42dB depth noise canceling, and much more. Learn how to use them with this new EDIFIER Neobuds S Manual.

EDIFIER Neobuds S Manual | Pairing & Charging Instructions

EDIFIER Neobuds S Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the button on the back case for 3 seconds to enter Bluetooth pairing mode. A light will turn on one by one from left to right on the case.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “EDIFIER Neobuds S”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 6: Press and hold the button on the back case for 3 seconds to enter Bluetooth pairing mode. A light will turn on one by one from left to right on the case.

Step 7: Select “EDIFIER Neobuds S”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

EDIFIER Neobuds S Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

EDIFIER Neobuds S Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the right earbud two times.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.

EDIFIER Neobuds S Manual | How to Activate Gaming Mode?

To activate or deactivate the gaming mode in the EDIFIER Neobuds S, all you have to do is to press the multifunction touch button on the left earbud three times.

EDIFIER Neobuds S Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the EDIFIER Neobuds S, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

EDIFIER Neobuds S Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

EDIFIER Neobuds S Manual | How to Reset?

Step 1: With the lid open and the earbuds inside of the charging case, press the button on the case three times.

Step 2: After that, a light will turn on one by one from left to right on the case, and the resetting will be done.

EDIFIER Neobuds S Manual | LED Light Status

Charging case

• A light will turn on one by one from left to right: The earbuds turn into Bluetooth pairing mode.
• A light will turn on one by one from left to right: The pairing was successful.
• Lights turning on one by one from center to sides and then turning off one by one from sides to center: Case charging / Earbuds battery.
• Lights turn off: Case fully charged.

A Guide To EDIFIER Neobuds S APP

The EDIFIER Neobuds S can be used with an application, called Edifier Connect. This application is available for iOS and Android devices.

• First page: On the first page, not only is the battery percentage that the earbuds have but there is also the ability to turn ANC and ambient sound mode on or off. Likewise, there are also the settings, where there is information about the earbuds, as well as some options for use and user manuals.
• Second page: On the second page, you will find information about the different products launched by Edifier, as well as blogs, news, and support in case of problems with the devices.
• Third page: On the third page, you will find general information about the application, as well as the devices with which it is compatible, FAQs, and more.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

EDIFIER Neobuds S earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above EDIFIER Neobuds S Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Edifier company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!