EDIFIER-TO-U2-Mini-Manual-5

EDIFIER TO-U2 Mini Manual | Step-by-step, In-depth Guide 2022

Aliexpress banner

The EDIFIER TO-U2 Mini have an OLED display on the charging case, Game Mode, up to 7 hours of music playtime + 18 hours using the charging case, a composite 13mm diaphragm dynamic driver unit, deeply optimized call noise reduction, the IP54 certification, and much more. Learn how to use them with this new EDIFIER TO-U2 Mini Manual.

EDIFIER TO-U2 Mini Manual | Pairing & Charging Instructions

EDIFIER TO-U2 Mini Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the button on the case for 3 seconds, and the display will show the Bluetooth icon, meaning that the earbuds are ready to pair with any device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “EDIFIER TO-U2 mini”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 6: Press and hold the button on the case for 3 seconds, and the display will show the Bluetooth icon, meaning that the earbuds are ready to pair with any device.

Step 7: Select “EDIFIER TO-U2 mini”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

EDIFIER-TO-U2-Mini-Manual-1

EDIFIER TO-U2 Mini Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

EDIFIER TO-U2 Mini Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

EDIFIER-TO-U2-Mini-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on the right earbud for about 3 seconds.

EDIFIER TO-U2 Mini Manual | How to Enable Gaming Mode?

To enable or disable the Gaming Mode in these earbuds, all you have to do is to press and hold the multifunction touch button on the left earbud for about 3 seconds.

EDIFIER-TO-U2-Mini-Manual-3

EDIFIER TO-U2 Mini Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the EDIFIER TO-U2 Mini, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

EDIFIER TO-U2 Mini Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

EDIFIER TO-U2 Mini Manual | How to Reset?

Step 1: With the lid open and the earbuds inside of the charging case, press the button on the case three times, and the display will show an “LR” icon.

Step 2: After that, the display will show a smiley face icon, and the resetting will be done.

EDIFIER-TO-U2-Mini-Manual-4

EDIFIER TO-U2 Mini Manual | Display Icons Description

  • A charging case with the lid open: Open the case.
  • A charging case with the lid closed: Close the case.
  • A charging case with an arrow pointing down: Place the earbuds into the case.
  • The Bluetooth icon: The earbuds are ready to pair with any device.
  • “LR” icon: The earbuds are resetting.
  • A smiley face: The pairing was successful.
  • A sad face: The pairing failed.
  • One battery: Charging case battery.
  • Two batteries: Earbuds battery.
  • A flash of lightning: Charging case/earbuds have low battery.
  • One battery while charging: Charging case/earbuds charging.
EDIFIER-TO-U2-Mini-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

EDIFIER TO-U2 Mini earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

EDIFIER-TO-U2-Mini-Manual-5

FAQs

Are EDIFIER TO-U2 Mini waterproof?

No, the EDIFIER TO-U2 Mini are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re dustproof, splash and sweat-resistant.

Does EDIFIER TO-U2 Mini have a microphone?

Yes, the EDIFIER TO-U2 Mini have integrated microphones.

Do EDIFIER TO-U2 Mini have low latency/gaming mode?

Yes! The EDIFIER TO-U2 Mini have a low latency/gaming mode.

How to know when EDIFIER TO-U2 Mini are fully charged?

To know when the EDIFIER TO-U2 Mini are charged, press the button on the charging case, and the display will show the charging status for 5 seconds.

Can EDIFIER TO-U2 Mini connect to PC and Laptop?

Yes, the EDIFIER TO-U2 Mini can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earbuds from the above EDIFIER TO-U2 Mini Manual. Want to know anything about them? Do not hesitate to ask in the comments section.