Edifier TWS330NB Manual | Step-by-step Guide

The Edifier TWS330NB comes with an IP54 certification, AVRCP, HFP, HSP, SBC, AAC technology, 8mm driver, a battery life of 5 hours, Bluetooth 5.0, and much more. Learn how to use them with this new Edifier TWS330NB Manual.

Edifier TWS330NB Manual | Everything You Need To Know!

Edifier TWS330NB Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Place the earbuds into the charging case.

Step 2: Press and hold the button on the case for around 3 seconds to enter Bluetooth pairing, and the white light on it will flash rapidly.

Step 3: Turn on the Bluetooth on the desired device.

Step 4: Go to the Bluetooth settings.

Step 5: Select “Edifier TWS330 NB”. If a password is needed, type “0000”.

Step 6: After that, the light on the case will be white and steady for around 2 seconds, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Place the earbuds into the charging case.

Step 7: Press and hold the button on the case for around 3 seconds to enter Bluetooth pairing, and the white light on it will flash rapidly

Step 8: Select “Edifier TWS330 NB”. If a password is needed, type “0000”.

Step 9: After that, the light on the case will be white and steady for around 2 seconds, and the pairing will be done.

Edifier TWS330NB Manual | How to Activate ANC?

To turn ANC on and off, all you have to do is to double-tap the touch panel on the left earbud.

Edifier TWS330NB Manual | How to Activate Gaming Mode?

To turn Gaming Mode on and off, all you have to do is to triple-tap the touch panel on the left earbud.

Edifier TWS330NB Manual | How to Turn On And Off?

Turn on: Open the lid of the charging case with the earbuds inside. They will automatically turn on.

Turn off: Place the earbuds into the charging case and close the lid. They will automatically turn off.

How to Control? / How to Operate? – Instructions

• Play and pause music: Tap the touch panel on the right earbud twice.
• Play the next song: Tap the touch panel on the right earbud three times.
• Answer an incoming call: Tap the touch panel on any of the earbuds twice.
• End a call: Tap the touch panel on any of the earbuds twice.
• Mode switch (noise cancellation mode, ambient sound mode and standard mode): Tap the touch panel on the left earbud twice.
• Game mode: Tap the touch panel on the left earbud three times.

Edifier TWS330NB Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Edifier TWS330NB Manual | LED Light Status

Charging case

• White light on for 2 seconds: Earbuds on.
• White light flashing quickly: Earbuds ready to pair.
• White light on for 2 seconds when pairing: Pairing successful.
• White light flashing slowly then quickly: Reset successful.

Edifier TWS330NB Manual | How to Reset?

Step 1: Place the earbuds into the charging case.

Step 2: Triple-click the button on the case to enter the TWS pairing mode of the left and right earbuds and to clear pairing records.

Step 3: After that, a white light will flash slowly then quickly, and the resetting will be done.

A Guide To Edifier TWS330NB APP

The Edifier TWS330NB can be used with an application, called Edifier Connect. This application is available for iOS and Android devices.

• First page: On the first page, not only is the battery percentage that the earbuds have, but there is also the ability to turn ANC and ambient sound mode on or off. Likewise, there are also the settings, where there is information about the earbuds, as well as some options for use and user manuals.
• Second page: On the second page, you will find information about the different products launched by Edifier, as well as blogs, news and support in case of problems with the devices.
• Third page: On the third page, you will find general information about the application, as well as the devices with which it is compatible, FAQs and more.

• 

• 

• 

• 

• 

Some Common Earbuds Problems & Troubleshooting

When charging the charging case, the battery icon does not display

If that happens, you can do the following:

1. Please ensure that the charging case is correctly connected with a power source.

2. If the earbuds are not used for a long time, the battery will not respond at once. At this time, recharge for about 30 minutes to back to the charging state.

When playing music, cannot control pause/play/previous/next track via the earbuds

If this happens, you will have to make sure that the paired device supports AVRCP (Audio/Video Remote Control Profile) profile.

Tap sensitivity is not good

 If this happens, you will have to make sure to touch in the e­ffective tap zone of the earbuds and see if the intensity/angle is moderate. If the tap sensitivity setting of these earbuds does not meet your usage habits, you can adjust it to suit your tap sensitivity in the earbuds APP.

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are correctly connected to the desired device.

4. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Edifier TWS330NB earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

FAQs

We hope you now know how to operate the earphone from the above Edifier TWS330NB Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Edifier company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!