Edifier-W200T-Mini-Manual-6

Edifier W200T Mini Manual | Instructions & Troubleshooting 2022

The Edifier W200T Mini comes with a 13mm dynamic driver, Qualcomm audio technology, cVc8.0 noise reduction, a total battery life of 4 hours of playtime, the IPX5 certification, Bluetooth 5.0, AAC, and SBC codecs, and much more. Learn how to use them with this new Edifier W200T Mini Manual.

Edifier W200T Mini Manual | Everything You Need To Know!

Edifier W200T Mini Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a green light will turn on for 1 second.

Step 2: Press and hold the multifunction touch button on both earbuds for 3 seconds, until a white and green light starts flashing quickly.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Edifier W200T Mini”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a green light will turn on for 1 second.

Step 7: Press and hold the multifunction touch button on both earbuds for 3 seconds, until a white and green light starts flashing quickly.

Step 8: Select “Edifier W200T Mini”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Edifier-W200T-Mini-Manual-1

Edifier W200T Mini Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Edifier W200T Mini Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a green light will turn on for 1 second.

Turn off:  Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Edifier-W200T-Mini-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 3 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for 3 seconds.
Edifier-W200T-Mini-Manual-3

Edifier W200T Mini Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Edifier W200T Mini, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Edifier W200T Mini Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Edifier-W200T-Mini-Manual-4

Edifier W200T Mini Manual | LED Light Status

Earbuds

  • Green light on for 1 second: Earbuds turn on.
  • White and green light start flashing quickly: Earbuds ready to pair.

Edifier W200T Mini Manual | How to Reset?

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically, and a green light will turn on for 1 second.

Step 2: Press and hold the multifunction touch button on both earbuds for 8 seconds.

Edifier-W200T-Mini-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Edifier W200T Mini earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Edifier-W200T-Mini-Manual-6

FAQs

Are Edifier W200T Mini waterproof?

The Edifier W200T Mini have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does Edifier W200T Mini have a microphone?

Yes, the Edifier W200T Mini have integrated microphones.

Do Edifier W200T Mini have low latency/gaming mode?

No, the Edifier W200T Mini don’t have a low latency/gaming mode.

How to know when Edifier W200T Mini are fully charged?

The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged.

Can Edifier W200T Mini connect to PC and Laptop?

Yes, the Edifier W200T Mini can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above Edifier W200T Mini Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Edifier company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!