Edifier X3 Manual | Step-by-step Pairing & Troubleshoot Guide

A while ago, we talked to you about all the features that were found on the inside and outside of one of the pairs of TWS headphones on the market, the Edifier X3, and today we will talk about them again, but more specifically about its user manual, which will help you to use them in a better way. Welcome to this explanation of the Edifier X3 Manual!

If you are interested in giving the original manual a look, you can do it here.

Edifier X3 Specs Sheet

Model	Edifier X3
Weight	Earbuds: 4 grams Charging case: 25 grams
Waterproof/IP ratings	IPX5
Bluetooth version	V5.0
Range/Distance	10 meters
Driver	6mm
Audio Decoding	SBC
Connectivity Port/ Charging Cable	Type-C
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: 6 hours Charging case: 18 hours
Charging Time	Earbuds: About 1.5 hours Charging case: About 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next, answer, end a call, voice assistant, gaming mode
Accessories	Charging case, user manual, USB cable, silicone ear tips
Price	30 USD

Edifier X3 Accessories

The earbuds come with the following accessories:

• Charging case.
• User manual.
• USB cable.
• Silicone ear tips.

Edifier X3 Manual | Guide & Troubleshooting

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

Step 2: Press and hold the multifunction touch button on both earbuds for 1 to 3 seconds, until a red and blue light starts flashing. The earbuds will pair with each other.

Step 3: Press the multifunction touch button on both earbuds 2 times. When a blue light starts flashing quickly, it means that the earbuds will be ready to pair with any device.

Step 4: Unlock the desired device.

Step 5: Go to the device’s settings.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Search for a new device.

Step 8: Select the Edifier X3, Edifier X3 L, or Edifier X3 R earbuds. If a password is needed, type “0000”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically and pair with each other.

Step 7: Press and hold the multifunction touch button on both earbuds for 1 to 3 seconds, until a red and blue light starts flashing. The earbuds will pair with each other.

Step 8: Press the multifunction touch button on both earbuds 2 times. When a blue light starts flashing quickly, it means that the earbuds will be ready to pair with any device.

Step 9: Select the Edifier X3, Edifier X3 L, or Edifier X3 R earbuds. If a password is needed, type “0000”.

After that, the pairing will be done.

How To Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch sensor is placed on the top outside part of the stem of the earbuds.

• Play or pause a song: Press the multifunction touch sensor on any of the earbuds one time.
• Play the next song: While listening to music, press the multifunction touch sensor on any of the earbuds three times.
• Play the previous song: While listening to music, press the multifunction touch sensor on any of the earbuds two times.
• Answer an incoming call: Press the multifunction touch sensor on any of the earbuds one time.
• End a current call: Press the multifunction touch sensor on any of the earbuds one time.
• Activate the voice assistant: Press and hold the multifunction touch sensor on any of the earbuds for about 2 seconds.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with app support.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A blue light on for 1 second: The earbuds turn on.
• A red and blue light starts flashing: The earbuds will pair with each other.
• A blue light flashing quickly: The earbuds will be ready to pair with any device.
• A blue light flashes six times quickly while resetting: The earbuds have been reset.

Charging Case

• A red light on while charging: The case is charging.
• No red light on while charging: The case is fully charged.

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

 Step 1: Go to the device’s settings.

Step 2: Delete the Edifier X3, Edifier X3 L, or Edifier X3 R earbuds from the devices’ Bluetooth list. 

Step 3: Turn off Bluetooth on the device. 

Step 4: Open the lid of the charging case. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically. 

Step 5: Take the earbuds out of the charging case. 

Step 6: Press and hold the multifunction touch sensor on both earbuds for about 8 seconds. This will reset the earbuds.

A blue light will flash six times, meaning that the earbuds have been reset. 

Step 7: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. 

Step 8: Turn on Bluetooth on the desired device. 

Step 9: Search for a new device. 

Step 10: Open the lid of the charging case. After that, a blue light will be on for 1 second, and the earbuds will turn on automatically and pair with each other. 

Step 11: Press and hold the multifunction touch button on both earbuds for 1 to 3 seconds, until a red and blue light starts flashing. The earbuds will pair with each other. 

Step 12: Press the multifunction touch button on both earbuds 2 times. When a blue light starts flashing quickly, it means that the earbuds will be ready to pair with any device. 

Step 13: Select the Edifier X3, Edifier X3 L, or Edifier X3 R earbuds. If a password is needed, type “0000”.

After that, the pairing will be done.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.
2. Try factory resetting the earbuds.
3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.
2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.
3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Edifier X3 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.