EDYELL C9 Manual | Pairing & Troubleshooting

The EDYELL C9 earbuds come with specs such as waterproof support thanks to the IPX7 certification, Bluetooth 5.3 technology with around 10 meters of connection range, a total battery life of up to 48 hours using the charging case, dual ENC Cancelling microphones, SBC and AAC audio codec support, and much more. Learn how to use these earbuds using this EDYELL C9 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store.

EDYELL C9 Specs Sheet

Model	EDYELL C9
Waterproof/IP ratings	IPX7
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC, AAC
Driver	13mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 6 hours Charging case: Around 42 hours
Charging Time	Earbuds: Around 1 hour Charging case: Around 1 hour
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant, Game mode
Accessories	Charging case, USB cable, user manual, care card
Price	Around 20 USD

EDYELL C9 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Care card.

EDYELL C9 Manual | Everything You Need To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the touch area on both earbuds for a couple of seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the touch area on both earbuds for a couple of seconds. After that, a red light will flash, and the earbuds will turn on.

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the C9 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair.

Step 7: Select the C9 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Control These Earbuds?

NOTE: The touch area is placed on the middle part of the body of the earbuds.

• Play and pause a song: Press the touch area on any of the earbuds two times.
• Play the next song: Press and hold the touch area on the right earbud for about 2 seconds.
• Play the previous song: Press and hold the touch area on the left earbud for about 2 seconds.
• Turn the volume up: Press the touch area on the right earbud one time.
• Turn the volume down: Press the touch area on the left earbud one time.
• Answer an incoming call: Press the touch area on any of the earbuds two times.
• End a current call: Press and hold the touch area on any of the earbuds for about 2 seconds.
• Reject an incoming call: Press and hold the touch area on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the touch area on any of the earbuds three times.
• Switch between the music and Game mode: Press the touch area on any of the earbuds four times.

What Do The Lights Mean?

Earbuds

• A red light turns on: The earbuds turn off.

Charging Case

• A 1 to 99 on the display while charging: The case is charging.
• A 100 on the display while charging: The case is fully charged.
• A red light on with the earbuds inside: The earbuds have around 25% of battery.
• An orange light on with the earbuds inside: The earbuds have around 50% of battery.
• The first green light on with the earbuds inside: The earbuds have around 75% of battery.
• The second green light on with the earbuds inside: The earbuds have around 100% of battery.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can be charged using a wireless charger.

How To Reset The Earbuds?

Step 1: Delete all pairing information about the C9 earbuds on the device.

Step 2: Take the earbuds out of the case.

Step 3: Press the touch area on both earbuds five times. This will clear the pairing information and the earbuds will reset.

How To Pair The Earbuds? – Mono Mode

Step 1: Take only one of the earbuds out of the case and close its lid. It will be ready to pair.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Search for a new device.

Step 4: Select the C9 earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above EDYELL C9 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.