Enacfire-A10-Manual-8

Enacfire A10 Manual | Step-by-step, In-depth Guide

The Enacfire A10earbuds come with specs such as a battery life of 6 hours + 29 hours using the charging case, Bluetooth 5.3 with up to 10 meters of working range, the amazing IPX8 waterproof certification, SBC and AAC codecs support, and much more. Learn how to use these earbuds using this Enacfire A10 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, in case you are interested in giving the original user manual a look, you can do it here.

Enacfire A10 Specs Sheet

ModelEnacfire A10
WeightEarbuds: Around 5 grams each
Waterproof/IP ratings  IPX8
Bluetooth version          V5.3
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               SBC, AAC
Driver  10mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 6 hours
Charging case: Around 29 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 1.5 hours
App Support     No
Controls/Features         Play and pause a song, turn the volume up and down, play the nest and previous song, answer, end and reject a call, voice assistant, ANC, Transparency mode
Accessories       Charging case, user manual, USB cable, ear tips
PriceAround 70 USD

Enacfire A10 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
Enacfire-A10-Manual-1

Enacfire A10 Manual | Guide & Troubleshooting

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 2 seconds. After that, the “Power on” voice prompt will sound, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 8 seconds. After that, the earbuds will turn off.

Enacfire-A10-Manual-2

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Enacfire A10 earbuds. If a password is needed, type “0000”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Step 7: Select the Enacfire A10 earbuds. If a password is needed, type “0000”.

After that, the pairing will be done.

Enacfire-A10-Manual-3

How To Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
  • Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the multifunction touch button on the right earbud three times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Activate The ANC/Transparency Mode

To activate and change between the ANC and the Transparency mode, all you have to do is to press the multifunction touch button on the left earbud one time to turn on the ANC mode; the “ANC mode” voice prompt will sound.

Then, press the multifunction touch button on the left earbud one time again to turn on the Transparency mode; the “Transparency mode” voice prompt will sound.

Press it again and it will turn off.

Enacfire-A10-Manual-5

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can be charged using a wireless charger.

Enacfire-A10-Manual-6

What Do The Lights Mean?

Earbuds

  • A light on while on the charging case: The earbuds are charging.
  • Said light turns off while on the charging case: The earbuds are fully charged.

Charging Case

  • A white light flashing while charging: The case is charging.
  • A white light stays on while charging: The case is fully charged.
  • One light on: The case has about 25% of battery.
  • Two lights on: The case has about 50% of battery.
  • Three lights on: The case has about 75% of battery.
  • Four lights on: The case has about 100% of battery.
Enacfire-A10-Manual-7

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

The Earbuds’ Voice Prompts

  • Power on: The earbuds turn on.
  • ANC Mode: The ANC mode is on.
  • Transparency Mode: The Transparencymode is on.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Enacfire-A10-Manual-8
Credits: Earphoneman

FAQs

Are the Enacfire A10 waterproof?

Yes, the Enacfire A10 are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat.

Do the Enacfire A10 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Enacfire A10 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Enacfire A10 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Enacfire A10 noise-canceling?

Yes, these earbuds come with noise-cancellation technology.

How to know when the Enacfire A10 are fully charged?

When the earbuds are charging, a light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Enacfire A10 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.