Enacfire-E18-Plus-Manual-8

Enacfire E18 Plus Manual | All You Have To Know

The Enacfire E18 Plus earbuds come with specs such as aptX lossless audio and CVC8.0 Noise Cancellation technology support, the amazing IPX8 waterproof certification, 8 hours of battery life for iOS devices, and 5 hours for Android devices, AAC and SBC codecs support, and much more. Learn how to use these earbuds using this Enacfire E18 Plus manual!

If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, in case you are interested in giving the original manual a look, you can do it here.

Enacfire E18 Plus Specs Sheet

ModelEnacfire E18 Plus
Waterproof/IP ratings  IPX8
Bluetooth version          V5.0
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               SBC, AAC
Driver  10mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 8 hours for the IOS System/Around 5 hours for the Android System
Charging case: Around 32 hours
Charging Time  Earbuds: Around 1 hour
Charging case: Around 2 hours with a USB cable/Around 4 hours with a wireless charger
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, switch a call between the earbuds and connected device
Accessories       Charging case, user manual, USB cable, ear tips, warranty card, happy card
PriceAround 50 USD

Enacfire E18 Plus Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
  • Warranty card.
  • Happy card.
Enacfire-E18-Plus-Manual-1

Enacfire E18 Plus Manual | Earbuds Pairing & Charging

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically.

Manually: Press the multifunction touch sensor on both earbuds one time. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch sensor on both earbuds for about 5 seconds. After that, the earbuds will turn off.

Enacfire-E18-Plus-Manual-2

How To Pair The Earbuds? – Stereo Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing in one of the earbuds, and that will mean that the earbuds are now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Enacfire E18 Plus earbuds. If a password is needed, type “0000” or “1234”. The “Pairing” voice prompt will sound.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing in one of the earbuds, and that will mean that the earbuds are now ready to pair with any device.

Step 7: Select the Enacfire E18 Plus earbuds. If a password is needed, type “0000” or “1234”. The “Pairing” voice prompt will sound.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

Enacfire-E18-Plus-Manual-3

How To Pair The Earbuds? – Mono Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

Step 2: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Step 3: Take the left earbud out of the charging case.

A blue and white light will start flashing, and that will mean that the earbud is now ready to pair with any device.

Step 4: Unlock the desired device.

Step 5: Go to the device’s settings.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Search for a new device.

Step 8: Select the Enacfire E18 Plus earbud. If a password is needed, type “0000” or “1234”. The “Pairing” voice prompt will sound.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

Step 7: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Step 8: Take the left earbud out of the charging case.

A blue and white light will start flashing, and that will mean that the earbud is now ready to pair with any device.

Step 9: Select the Enacfire E18 Plus earbud. If a password is needed, type “0000” or “1234”. The “Pairing” voice prompt will sound.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

Enacfire-E18-Plus-Manual-4

How To Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch sensor is placed on the top circular part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch sensor on any of the earbuds one time.
  • Play the next song: While listening to music, press the multifunction touch sensor on the right earbud two times.
  • Play the previous song: While listening to music, press the multifunction touch sensor on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch sensor on the left earbud one time.
  • End a current call: Press the multifunction touch sensor on the left earbud one time.
  • Reject an incoming call: Press the multifunction touch sensor on the left earbud two times.
  • Switch a call between the earbuds and the connected device: Press the multifunction touch sensor on the left earbud two times.
  • Activate the voice assistant: Press and hold the multifunction touch sensor on any of the earbuds for about 1 second.

The volume can only be adjusted using the connected device.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Enacfire-E18-Plus-Manual-5

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically. Also, it can be charged using a wireless charger.

What Do The Lights Mean?

Earbuds

  • A blue light turns on: The earbuds turn on.
  • A blue and white light flashing in one of the earbuds: The earbuds are now ready to pair with any device.
  • A white light on while on the charging case: The earbuds are charging.
  • Said white light turns off while on the charging case: The earbuds are fully charged.
  • A blue and white light flashing while resetting: The earbuds are resetting.

Charging Case

  • A blue light flashes one time with the earbuds inside: The earbuds have between 0% and 25% of battery.
  • A blue light flashes two times with the earbuds inside: The earbuds have between 26% and 50% of battery.
  • A blue light flashes three times with the earbuds inside: The earbuds have between 51% and 75% of battery.
  • A blue light flashes four times with the earbuds inside: The earbuds have between 76% and 100% of battery.
  • A blue light flashes one time every 2 seconds while charging: The case has between 0% and 25% of battery.
  • A blue light flashes two times every 2 seconds while charging: The case has between 26% and 50% of battery.
  • A blue light flashes three times every 2 seconds while charging: The case has between 51% and 75% of battery.
  • A blue light flashes four times every 2 seconds while charging: The case has between 76% and 100% of battery.
  • A blue light on while charging: The case is fully charged.

The Earbuds’ Voice Prompt

  • Power on: The earbuds turn on.
  • Pairing: the earbuds are pairing with the device.
  • Connected: The connection was successful.

How To Reset And Re-Pair These Earbuds?

Please follow the below steps when both earbuds fail to pair with each other or connection-related issues occur:

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the Enacfire E18 Plus earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Step 5: Press and hold the multifunction touch sensor on both earbuds for about 10 seconds, or until a blue and white light will starts flashing. This will reset the earbuds.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Search for a new device.

Step 8: Take the earbuds out of the charging case. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing in one of the earbuds, and that will mean that the earbuds are now ready to pair with any device.

Step 9: Select the Enacfire E18 Plus earbuds. If a password is needed, type “0000” or “1234”. The “Pairing” voice prompt will sound.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

Enacfire-E18-Plus-Manual-7

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Enacfire-E18-Plus-Manual-8

FAQs

Are the Enacfire E18 Plus waterproof?

Yes, the Enacfire E18 Plus are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat.

Do the Enacfire E18 Plus have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Enacfire E18 Plus have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Enacfire E18 Plus connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Enacfire E18 Plus noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Enacfire E18 Plus are fully charged?

When the earbuds are charging, a white light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Enacfire E18 Plus manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.