Enacfire-E19-Manual-7

Enacfire E19 Manual | Step-by-step Earbuds User Guide

The Enacfire E19 earbuds come with specs such as a 500mAh battery charging case, support for the HFP, HSP, and AVRCP Bluetooth profiles, about 3 hours of battery life on a single charge, Bluetooth 5.0, the IPX6 waterproof certification, and much more. Learn how to use these earbuds using this Enacfire E19 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, in case you are interested in giving the original manual a look, you can do it here.

Enacfire E19 Specs Sheet

ModelEnacfire E19
WeightEarbuds: Around 4 grams each
Waterproof/IP ratings  IPX6
Bluetooth version          V5.0
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               SBC
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 3 hours
Charging case: Around 27 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 1.5 to 2 hours
App Support     No
Controls/Features         Play and pause a song, play the next song, answer, end, and reject a call, voice assistant
Accessories       Charging case, user manual, USB cable, ear tips, warranty card
PriceAround 45 USD

Enacfire E19 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
  • Warranty card.
Enacfire-E19-Manual-1

Enacfire E19 Manual | Guide To Use The Earbuds

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound and a blue light will flash one time, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 2 seconds. After that, the “Power on” voice prompt will sound and a blue light will flash one time, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the “Power off” voice prompt will sound and a white light will flash one time, and the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 4 seconds. After that, the “Power off” voice prompt will sound and a white light will flash one time, and the earbuds will turn off.

Enacfire-E19-Manual-2

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

A white light will flash two times and the “Connected left channel/connected right channel” voice prompt will sound, and the earbuds will pair with each other.

A blue and white light will start flashing, the “Pairing” voice prompt will sound, and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the E19-R earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

A white light will flash two times and the “Connected left channel/connected right channel” voice prompt will sound, and the earbuds will pair with each other.

A blue and white light will start flashing, the “Pairing” voice prompt will sound, and the earbuds will be ready to pair with any device.

Step 7: Select the E19-R earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Enacfire-E19-Manual-3

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch button on any of the earbuds two times.
  • Play the next song: While listening to music, press the multifunction touch button on any of the earbuds two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times. An “Incoming call” voice prompt will sound.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 1 second. A “Di” voice prompt will sound.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Enacfire-E19-Manual-4

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

Enacfire-E19-Manual-5

The Earbuds’ Voice Prompts

  • Power on: The earbuds turn on.
  • Power off: The earbuds turn off.
  • Pairing: The earbuds are ready to pair with any device.
  • Connected left channel/connected right channel: The earbuds are connected with each other.
  • Incoming call: There is an incoming call.
  • “Di” sound: The voice assistant was turned on.
  • Low battery, please charge: The earbuds have a low battery level.

What Do The Lights Mean?

Earbuds

  • A blue and white light flashing: The earbuds are now ready to pair with any device.
  • A light on while on the charging case: The earbuds are charging.
  • The light turns off while on the charging case: The earbuds are fully charged.

Charging Case

  • One light on while charging: The case has about 1/3 of the battery.
  • Two lights on while charging: The case has about 2/3 of the battery
  • Three lights on while charging: The case is fully charged.
Enacfire-E19-Manual-6

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Enacfire-E19-Manual-7
Credits: DigitalNews365

FAQs

Are the Enacfire E19 waterproof?

Yes, the Enacfire E19 are waterproof (IPX6 and up). They have a rating of IPX6, which means that they’re protected against water.

Do the Enacfire E19 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Enacfire E19 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Enacfire E19 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Enacfire E19 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Enacfire E19 are fully charged?

When the earbuds are charging, a light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Enacfire E19 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.