enacfire-e60-earbuds-manual-d

Enacfire E60 Manual | Earbuds User Guide

Enacfire is one of the best-known wireless earbuds brands in the world, not only for its variety of earbuds but also for the quality they have. Because of that, today we will talk about one of these pairs of earbuds, the Enacfire E60, and we will show you a step-by-step user guide in this Enacfire E60 Manual.

If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, if you want to give the original manual a look, you can do it here.

Enacfire E60 Specs Sheet

ModelEnacfire E60
WeightEarbuds: 4.6 grams each
Waterproof/IP ratings  IPX8
Bluetooth version          V5.0
Range/Distance10 meters
Driver6mm
Audio DecodingSBC
Connectivity Port/Charging CableType-C
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 8 hours
Charging case: About 40 hours
Charging Time  Earbuds: About 1.5 hours
Charging case: About 2 hours
App Support     No
Controls/Features         Play or pause music, play the next and previous song, turn the volume up and down, answer, end, or reject a call, voice assistant, Gaming mode
Accessories       Charging case, user manual, USB cable, ear tips, warranty card
PriceAbout 60 USD

Enacfire E60 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
  • Warranty card.
Enacfire-E60-Manual-0-1

Enacfire E60 Manual | Guide & Troubleshooting

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 2 seconds. After that, the “Power on” voice prompt will sound, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 8 seconds. After that, the earbuds will turn off.

Enacfire-E60-Manual-0-2

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a red and blue light flashes only in one of the earbuds, the earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the ENACFIRE E60 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a red and blue light flashes only in one of the earbuds, the earbuds will now be ready to pair with any device.

Step 7: Select the ENACFIRE E60 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Enacfire-E60-Manual-0-3

How To Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud for about 1 second.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud for about 1 second.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
  • Activate the Gaming mode: Press the multifunction touch button on any of the earbuds four times. When turned on or off, the “Game mode” and “Game off” voice prompts will sound.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

Enacfire-E60-Manual-0-5
Credits: Scarbir

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Reset And Re-Pair These Earbuds?

To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the ENACFIRE E60 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Step 5: Press and hold the multifunction touch button on both earbuds for about 8 seconds, or until a blue and white light starts flashing. The earbuds will restart automatically after clearing the pairing records.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Search for a new device.

Step 8: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a red and blue light flashes only in one of the earbuds, the earbuds will now be ready to pair with any device.

Step 9: Select the ENACFIRE E60 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Enacfire-E60-Manual-0-6

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

What Do The Lights Mean?

Earbuds

  • A red and blue light flashing in one of the earbuds: The earbuds are now ready to pair with any device.
  • A white light on while on the charging case: The earbuds are charging.
  • The white light turns off while on the charging case: The earbuds are fully charged.
  • A blue and white light flashing while resetting: The earbuds are resetting.

Charging Case

  • One light on: The case has about 1/4 of the battery left.
  • Two lights on: The case has about 2/4 of the battery left.
  • Three lights on: The case has about 3/4 of the battery left.
  • Four lights on: The case is fully charged.
Enacfire-E60-Manual-0-7

The Earbuds’ Voice Prompt

  • Power on: The earbuds turn on.
  • Game mode: The Gaming mode was turned on.
  • Game off: The Gaming mode was turned off.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Enacfire-E60-Manual-0-8
Credits: Scarbir

FAQs

Are the Enacfire E60 waterproof?

Yes, the Enacfire E60 are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat.

Do the Enacfire E60 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Enacfire E60 have a low latency/gaming mode?

Yes, these earbuds have a low latency/gaming mode.

Can the Enacfire E60 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Enacfire E60 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Enacfire E60 are fully charged?

When the earbuds are charging, a white light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Enacfire E60 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.