Enacfire-Future-Plus-Manual-8

Enacfire Future Plus Manual | How To Use These Earbuds?

The Enacfire Future Plus earbuds come with specs such as the amazing IPX8 waterproof certification, Bluetooth 5.0, AAC and SBC codecs support, about 1.5 hours of charging time, a battery life of about 4 hours + 14 hours using the charging case, and much more. Learn how to use these earbuds using this Enacfire Future Plus manual!

If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, in case you are interested in giving the original manual a look, you can do it here.

Enacfire Future Plus Specs Sheet

ModelEnacfire Future Plus
Waterproof/IP ratings  IPX8
Bluetooth version          V5.0
Range/Distance20 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               SBC, AAC
Driver  6mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 4 hours
Charging case: Around 10 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 2 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call
Accessories       Charging case, user manual/warranty card, USB cable, ear tips, earbud bag
PriceAround 60 USD

Enacfire Future Plus Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual/Warranty card.
  • USB cable.
  • Ear tips.
  • Earbud bag.
Enacfire-Future-Plus-Manual-1

Enacfire Future Plus Manual | Step-by-step Guide

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 2 seconds. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, a white light will turn on for 1 second, and the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 4 seconds. After that, a white light will turn on for 1 second, and the earbuds will turn off.

How To Pair The Earbuds? – Stereo Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing in one of the earbuds, and that will mean that the earbuds are now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Enacfire Future Plus earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing in one of the earbuds, and that will mean that the earbuds are now ready to pair with any device.

Step 7: Select the Enacfire Future Plus earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Enacfire-Future-Plus-Manual-3

How To Pair The Earbuds? – Mono Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the selected earbud out. After that, a blue light will turn on, and the earbud will turn on automatically.

Step 2: Press and hold the multifunction touch button on the earbud for about 4 seconds. After that, a white light will turn on for 1 second, and the earbud will turn off.

Step 3: Press and hold the multifunction touch button on the earbud for about 4 seconds. A blue and white light will start flashing, and that will mean that the earbud is now ready to pair with any device.

Step 4: Unlock the desired device.

Step 5: Go to the device’s settings.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Search for a new device.

Step 8: Select the Enacfire Future Plus earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the selected earbud out. After that, a blue light will turn on, and the earbud will turn on automatically.

Step 7: Press and hold the multifunction touch button on the earbud for about 4 seconds. After that, a white light will turn on for 1 second, and the earbud will turn off.

Step 8: Press and hold the multifunction touch button on the earbud for about 4 seconds. A blue and white light will start flashing, and that will mean that the earbud is now ready to pair with any device.

Step 9: Select the Enacfire Future Plus earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Enacfire-Future-Plus-Manual-4-1

How To Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch sensor is placed on the top circular part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch sensor on the right earbud one time.
  • Play the next song: While listening to music, press the multifunction touch sensor on the right earbud two times.
  • Play the previous song: While listening to music, press the multifunction touch sensor on the left earbud two times.

NOTE: The next and previous song function is not supported when the earbuds are used in mono mode.

  • Answer an incoming call: Press the multifunction touch sensor on the left earbud one time.
  • End a current call: Press the multifunction touch sensor on the left earbud one time.
  • Reject an incoming call: Press the multifunction touch sensor on the left earbud two times.

NOTE: In stereo mode, only the left earbud will hear the voice. However, both earbuds will work normally in mono mode.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A blue light turns on: The earbuds turn on.
  • A white light turns on for 1 second: The earbuds turn off
  • A blue and white light flashing in one of the earbuds: The earbuds are now ready to pair with any device.
  • A white light on while on the charging case: The earbuds are charging.
  • Said white light turns off while on the charging case: The earbuds are fully charged.

Charging Case

  • The first light flashing: The case has a low battery.
  • One light on while charging: The case has about 1/3 of battery.
  • Two lights on while charging: The case has more than 2/3 of battery.
  • Three lights on while charging: The case is fully charged.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Enacfire-Future-Plus-Manual-7-1

The Earbuds’ Voice Prompt

  • Power on: The earbuds turn on.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Enacfire-Future-Plus-Manual-8

FAQs

Are the Enacfire Future Plus waterproof?

Yes, the Enacfire Future Plus are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat.

Do the Enacfire Future Plus have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Enacfire Future Plus have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Enacfire Future Plus connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Enacfire Future Plus noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Enacfire Future Plus are fully charged?

When the earbuds are charging, a white light is on. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Enacfire Future Plus manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.