Enacfire-T1-Manual-8

Enacfire T1 Manual | Everything You Have To Know

The Enacfire T1 earbuds come with specs such as AAC and SBC support, Bluetooth 5.0 with a working range of about 10 meters without obstacles, 4 MEMS ENC microphones for clear calls, a Qualcomm chipset, AptX Lossless Audio technology, the amazing IPX8 waterproof certification, and much more. Learn how to use these earbuds using this Enacfire T1 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Enacfire official website. Also, in case you are interested in giving the original manual a look, you can do it here.

Enacfire T1 Specs Sheet

ModelEnacfire T1
WeightEarbuds: Around 3.3 grams each
Waterproof/IP ratings  IPX8
Bluetooth version          V5.0
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Audio Decoding               SBC, AAC
Driver  12mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 7 hours
Charging case: Around 35 hours
Charging Time  Earbuds: Around 1.5 hours
Charging case: Around 1.5 to 2 hours
App Support     No
Controls/Features         Play and pause a song, turn the volume up and down, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories       Charging case, user manual, USB cable, ear tips, warranty card
PriceAround 50 USD

Enacfire T1 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
  • Warranty card.
Enacfire-T1-Manual-1

Enacfire T1 Manual | Pairing & Charging Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 1 second. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 8 seconds. After that, the earbuds will turn off.

Enacfire-T1-Manual-2

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing and the “Pairing” voice prompt will sound, meaning that the earbuds are now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the T1-R earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt may sound, and the pairing will be done.

NOTE: On the iOS system, the earbuds may appear with the name “T1-L” or “Headset”, while on the Android system, they may appear with the name “T1-L”.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair with each other.

A blue and white light will start flashing and the “Pairing” voice prompt will sound, meaning that the earbuds are now ready to pair with any device.

Step 7: Select the T1-R earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt may sound, and the pairing will be done.

NOTE: On the iOS system, the earbuds may appear with the name “T1-L” or “Headset”, while on the Android system, they may appear with the name “T1-L”.

How To Pair The Earbuds? – Single Mode

With The Charging Case

Step 1: Open the lid of the charging case and take the selected earbud out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbud will turn on automatically.

A blue and white light will start flashing and the “Pairing” voice prompt will sound, meaning that the earbud is now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the T1-R or T1-L earbud. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt may sound, and the pairing will be done.

Without The Charging Case

NOTE: Make sure that the earbuds are turned off.

Step 1: Press and hold the multifunction touch button on the selected earbud for about 1 second. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbud will turn on.

A blue and white light will start flashing and the “Pairing” voice prompt will sound, meaning that the earbud is now ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the T1-R or T1-L earbud. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt may sound, and the pairing will be done.

Enacfire-T1-Manual-4

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top oval part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud. A “Beep” voice prompt will sound when the maximum volume is reached.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud. A “Beep” voice prompt will sound when the maximum volume is reached.
  • Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
  • Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times. A “Beep” voice prompt will sound.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A white light turns on: The earbuds turn on.
  • A red and white light flashing: The earbuds are now ready to pair with any device.

Charging Case

  • The top light on with the earbuds inside: The right earbud is charging.
  • The bottom light on with the earbuds inside: The left earbud is charging.
  • Said lights turn off with the earbuds inside: The earbuds are fully charged.
  • A light on while charging: The case has about 1/4 of battery.
  • Two lights on while charging: The case has about 2/4 of battery.
  • Three lights on while charging: The case has about 3/4 of battery.
  • Four lights on while charging: The case is fully charged.
Enacfire-T1-Manual-6

The Earbuds’ Voice Prompt

  • Power on: The earbuds turn on.
  • Pairing: The earbuds are now ready to pair with any device.
  • Connected: The earbuds are now connected to the device.
  • Beep: The voice assistant was turned on or off/the maximum or minimum volume has been reached/the earbuds turn off.

How To Reset And Re-Pair These Earbuds?

Please follow the below steps when both earbuds fail to pair with each other or connection-related issues occur:

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Turn off Bluetooth on the device.

Step 3: Take the earbuds out of the charging case.

Step 4: Press and hold the multifunction touch button on both earbuds for about 8 seconds. After that, the earbuds will turn off.

Step 5: Press and hold the multifunction touch button on the left earbud for about 8 seconds. A blue and white light will flash three times.

Step 6: Press and hold the multifunction touch button on the right earbud for about 8 seconds. A blue and white light will flash three times.

This will reset the earbuds.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Delete the T1-R earbuds from the devices’ Bluetooth list.

Step 9: Search for a new device.

Step 10: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, a blue light will turn on, and the earbuds will turn on automatically and pair to each other.

A blue and white light will start flashing and the “Pairing” voice prompt will sound, meaning that the earbuds are now ready to pair with any device.

Step 11: Select the T1-R earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt may sound, and the pairing will be done.

NOTE: Don’t press and hold the button on both earbuds at the same time.

Enacfire-T1-Manual-7

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Enacfire-T1-Manual-8

FAQs

Are the Enacfire T1 waterproof?

Yes, the Enacfire T1 are waterproof (IPX6 and up). They have a rating of IPX8, this being the highest and meaning that not only are they against water but are also protected against heavy rain and heavy sweat.

Do the Enacfire T1 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Enacfire T1 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Enacfire T1 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the Enacfire T1 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the Enacfire T1 are fully charged?

When the earbuds are charging, a light is on the case. When fully charged, the light turns off.

We hope you now know how to operate the earbuds from the above Enacfire T1 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.