Exfit BCS-T90 Manual | Step-by-step Pairing & Troubleshooting

The Exfit BCS-T90 comes with an IPX4 certification, a super powerful Qualcomm chipset, 4 microphones, a battery life of 8 hours, Bluetooth 5.0, and much more. Learn how to use them with this new Exfit BCS-T90 Manual.

Exfit BCS-T90 Manual | Everything You Need To Know!

Exfit BCS-T90 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will automatically turn on, pair to each other and be ready to pair to any device.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the Bluetooth settings.

Step 4: Select “BCS-T90”. If a password is needed, type “0000”.

Step 5: After that, a blue light will turn on and flash slowly, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. They will automatically turn on, pair to each other and be ready to pair to any device.

Step 7: Select “BCS-T90”. If a password is needed, type “0000”.

Step 8: After that, a blue light will turn on and flash slowly, and the pairing will be done.

Exfit BCS-T90 Manual | How to Turn On And Off?

Turn on: Take the earbuds out of the charging case. They will automatically turn on.

Turn off: Place the earbuds into the charging case. They will automatically turn off.

How to Control? / How to Operate? – Instructions

• Play and pause music: Tap the touch panel on any of the earbuds once.
• Play the next song: Tap the touch panel on the right earbud three times.
• Play the previous song: Tap the touch panel on any of the earbuds three times.
• Turn the volume up: Press and hold the touch panel on the right earbud.
• Turn the volume down: Press and hold the touch panel on the left earbud.
• Answer an incoming call: Tap the touch panel on any of the earbuds once.
• End a call: Tap the touch panel on any of the earbuds once.
• Reject an incoming call: Press and hold the touch panel on any of the earbuds for 1 second.
• Activate the Voice Assistant: Tap the touch panel on any of the earbuds twice.

• 

• 

• 

Edifier TWS5 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Exfit BCS-T90 Manual | LED Light Status

Charging case

• Red light on the front: Earbuds have low battery.
• Yellow light on the front: Earbuds have medium battery.
• Green light on the front: Earbuds are fully charged.
• Red light blinking on the back: Case needs to be charged.
• Red light on the back: Case has low battery.
• Yellow light blinking on the back: Case has medium battery.
• Green light blinking on the back: Case fully charged.

Exfit BCS-T90 Manual | How to Reset?

Step 1: Take the earbuds out of the charging case.

Step 2: Press and hold the touch panel on both earbuds for 15 seconds. A light will blink twice.

Step 3: After that, the resetting will be done.

A Guide To Exfit BCS-T90 APP

The Exfit BCS-T90 can be used with an application, called EXFIT MATE. This application is available for iOS and Android devices.

This application brings with it several amazing features. Not only can you see the battery percentage of both earbuds, but you can also increase or decrease their volume and change the sounds through the equalizer. Besides that, you can also access the settings of the earbuds, where you can change the controls depending on what you want. Finally, the application also has different user manuals.

• 

• 

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Exfit BCS-T90 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Exfit BCS-T90 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Exfit company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!