Falwedi T19 Manual | Pairing & Troubleshooting 2022

The Falwedi T19 has the most advanced Bluetooth 5.0 technology, supporting HSP, HFP, A2DP, AVRCP, providing in call stereo sound and fast stable transmission, 5 hours of playtime + 25 hours using the charging case, a 13-millimeter vibrating diaphragm, and HD rendering technology, and much more. Learn how to use them with this new Falwedi T19 Manual.

Falwedi T19 Manual | Everything You Need To Know!

Falwedi T19 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “T19”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Select “T19”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Falwedi T19 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Falwedi T19 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for a couple of seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for a couple of seconds.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press and hold the multifunction touch button on the right earbud.
• Play the previous song: Press and hold the multifunction touch button on the left earbud.
• Turn the volume up: Press the multifunction touch button on the right earbud three times.
• Turn the volume down: Press the multifunction touch button on the left earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

Falwedi T19 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Falwedi T19, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Falwedi T19 Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Falwedi T19 Manual | How to Reset?

Step 1: Delete the “T19” earbuds device from the Bluetooth list on your phone.

Step 2: Take out both earbuds from the charging case and turn them off by pressing and holding the multifunction touch button on both earbuds for a couple of seconds.

Step 3: Press and hold the multifunction touch button on both earbuds for about 15 seconds, or until an orange and white light starts flashing for about 1 second, and the earbuds will turn off.

Step 4: Turn the earbuds on by pressing and holding the multifunction touch button on both earbuds for a couple of seconds. After that, an orange and white light starts flashing again, and the resetting will be done.

Falwedi T19 Manual | LED Light Status

Earbuds

• White light on: Earbuds charging.
• Orange and white light starts flashing: Earbuds resetting.

Charging case

• White light on: Case charging the earbuds.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Falwedi T19 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Falwedi T19 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.