Final Audio ZE3000 Manual | Step-by-step Guide 2022

The Final Audio ZE3000 comes with a 6mm dynamic driver, the IPX4 certification, Bluetooth 5.2, a battery life of about 7 hours + 28 hours using the charging case, and much more. Learn how to use them with this new Final Audio ZE3000 Manual.

Final Audio ZE3000 Manual | Everything You Need To Know!

Final Audio ZE3000 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Place the earbuds into the charging case.

Step 2: Close the lid of the charging case.

Step 3: Open the lid of the charging case. After that, a red light will turn on for 3 seconds, and the earbuds will turn on automatically.

When a blue and red light starts flashing in one of the earbuds, they will be ready to pair with any device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select “ZE3000”. If a password is needed, type “0000”.

Step 6: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Place the earbuds into the charging case.

Step 6: Close the lid of the charging case.

Step 7: Open the lid of the charging case. After that, a red light will turn on for 3 seconds, and the earbuds will turn on automatically.

When a blue and red light starts flashing in one of the earbuds, they will be ready to pair with any device.

Step 8: Select “ZE3000”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Final Audio ZE3000 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Final Audio ZE3000 Manual | How to Turn On And Off?

Turn on: Open the lid of the charging case. After that, a red light will turn on for 3 seconds, and the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds to turn them off.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press the multifunction touch button on the right earbud two times.
• Turn the volume down: Press the multifunction touch button on the left earbud two times.
• Play the next song: Press and hold the multifunction touch button on the right earbud until you hear a “beep” sound.
• Play the previous song: Press and hold the multifunction touch button on the left earbud until you hear a “beep” sound.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press and hold the multifunction touch button on any of the earbuds until you hear a “beep” sound.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

Final Audio ZE3000 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Final Audio ZE3000, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Final Audio ZE3000 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can use a Qi Wireless charger.

Final Audio ZE3000 Manual | LED Light Status

Earbuds

• A red light on for 3 seconds: The earbuds turn on.
• A blue and red light starts flashing in one of the earbuds: The earbuds will be ready to pair with any device.
• A green light flashing while charging: The earbuds have between 0% and 99% of battery.
• A green light turns off while charging: The earbuds are fully charged.

Charging case

• A red light on: The case has less than 10% of battery.
• A yellow light on: The case has between 10% and 99% of battery.
• A green light on: The case is fully charged.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Final Audio ZE3000 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Final Audio ZE3000 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.