Home Audiophile Earbuds Manuals The Google Pixel Buds Pro earbuds come with a total battery life of 31 hours using the charging case, Active Noise Canceling, Bluetooth 5.0, the IPX4 sweat and dust-proof certification, 1mm drivers, 3 microphones in each earbud, and more. Learn how to use these earbuds using this manual! What's Inside ToggleGoogle Pixel Buds Pro | How To Use?How to Pair The Earbuds?How to Wear?How to Turn On and Off?How to Control? / How to Operate? – InstructionsHow to Activate The ANC Mode?How to Activate The Mono Mode?How to Charge The Earbuds?What Do The Lights Mean?How to Reset The Earbuds?A Guide To The Google Pixel Buds Pro APPHow to Update The Firmware?Some Common Problems & TroubleshootingFAQs Google Pixel Buds Pro | How To Use? How to Pair The Earbuds? To Google Pixel or Android 6.0+ Phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. When a light starts flashing on the case, the earbuds will be ready to pair with any device. Step 2: Make sure that the device is unlocked and with Bluetooth on. Step 3: Select the “Pixel Buds Pro” pairing notification and follow the on-screen steps. After that, the pairing will be done. Credits: Google To iOS and Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: Press and hold the pairing button on the back of the charging case for about 3 seconds, until a light on the case starts flashing. Step 3: Turn on Bluetooth on the desired device. Step 4: Go to the device’s Bluetooth settings. Step 5: Select the “Pixel Buds Pro”. If a password is needed, type “0000”. After that, the pairing will be done. To PC (Windows) Step 1: Turn on Bluetooth on the desired device. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: Press and hold the pairing button on the back of the charging case for about 3 seconds, until a light on the case starts flashing. Step 7: Select the “Pixel Buds Pro”. If a password is needed, type “0000”. After that, the pairing will be done. Credits: Google How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How to Turn On and Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Credits: Engadget How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch area on any of the earbuds one time. Play the next song: Press the multifunction touch area on any of the earbuds two times. Play the previous song: Press the multifunction touch area on any of the earbuds three times. Answer an incoming call: Press the multifunction touch area on any of the earbuds one time. End a current call: Press the multifunction touch area on any of the earbuds two times. Reject an incoming call: Press the multifunction touch area on any of the earbuds two times. Activate the voice assistant: Press and hold the multifunction touch area on any of the earbuds. How to Activate The ANC Mode? To activate or deactivate the ANC mode in these earbuds, all you have to do is to press and hold the multifunction touch area on any of the earbuds. Credits: Google How to Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How to Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Credits: Engadget What Do The Lights Mean? Charging case A white light flashing with the lid open: The earbuds are ready to pair with any device. A white light on with the earbuds inside and the lid open: The earbuds are fully charged. An orange light on with the earbuds inside and the lid open: The earbuds are charging. A white and orange light flashing in the pairing process with the lid open: There was a pairing problem. An orange light flashing with the lid open: The earbuds have a low battery. A white light on with the lid closed: The case is fully charged. An orange light on with the lid closed: The case is fully charged. An orange light flashing with the lid closed: The earbuds have a low battery. A light flashing while resetting: The earbuds are resetting. A white and orange light flashing, and turns off while resetting: The earbuds are resetting. Credits: Google Credits: Google How to Reset The Earbuds? Step 1: Go to the device’s Bluetooth settings and forget the “Pixel Buds Pro”. Step 2: Place the earbuds into the charging case and close the lid for about 10 seconds. Step 3: Open the lid of the charging case and keep the earbuds inside. Step 4: Press and hold the pairing button on the back of the case for about 20 to 30 seconds, until the light on the front of the case starts flashing. When it stops, let go of the button. A white and orange light will start flashing, and it will turn white. After that, the resetting will be done. A Guide To The Google Pixel Buds Pro APP The Google Pixel Buds Pro can be used with an application, called Google Pixel Buds. This application is available in the Play Store for Android devices. When opening the application, the first thing we have to do is connect our earbuds, and after that, the main page will appear. At the top is the battery percentage of the earbuds and the charging case, and then comes the features of the application. Not only can you configure the operation of Google Assistant, but you can also have the “Find device” feature, you can configure the controls on the earbuds, there is an Equalizer, and more settings such as information about the earbuds and firmware updates, in case there is any. How to Update The Firmware? To Google Pixel or Android 6.0+ Devices Step 1: Place the earbuds into the charging case and keep the lid open. Step 2: Go to Settings. Step 3: Go to Connected devices. Step 4: Click on Pixel Bud’s settings. Step 5: Go to More settings. Step 6: Go to Firmware update. Step 7: Click on Update available. After that, just follow the on-screen instructions. This will take about 15 minutes. To iOS and Android Phones Step 1: Place the earbuds into the charging case and keep the lid open. Step 2: Open the Google Pixel Buds app. Step 3: Go to More settings.See alsoSkullcandy Smokin’ Buds Manual | Step-by-step GuideGines·August 5, 2023 Step 4: Go to Firmware update. Step 5: Click on Update available. After that, just follow the on-screen instructions. This will take about 15 minutes. Credits: Engadget Some Common Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Engadget FAQs Are the Google Pixel Buds Pro waterproof? No, the Google Pixel Buds Pro are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant. Do the Google Pixel Buds Pro have a microphone? Yes, the earbuds come with integrated microphones. Do the Google Pixel Buds Pro have a low latency/gaming mode? No. These earbuds don’t have a low latency/gaming mode. How to know when the Google Pixel Buds Pro are fully charged? When the earbuds are charging, an orange light is on the case. When fully charged, the said light turns white. Can the Google Pixel Buds Pro connect to PCs and laptops? Yes, these earbuds can connect to PCs, laptops, and even tablets. Are the Google Pixel Buds Pro noise canceling? Yes. These earbuds come with noise-cancellation technology. We hope you now know how to operate the earphone from the above Google Pixel Buds Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.