GOVO GoBuds 410 Manual | Pairing & Charging Instructions

The GOVO GoBuds 410 earbuds come with specs such as 5.5 hours of battery life + 14.5 hours using the charging case, Bluetooth 5.0, up to 10 meters of connectivity range, 6mm drivers, the IPX5 dust and sweat-proof certification, built-in microphones, and much more. Learn how to use these earbuds using this GOVO GoBuds 410 manual!

If you are interested in purchasing these earbuds, you can easily do it using the GOVO official website. Also, in case you are interested in giving the original manual a look, you can do it here.

GOVO GoBuds 410 Specs Sheet

Model	GOVO GoBuds 410
Waterproof/IP ratings	IPX5
Bluetooth version	V5.0
Range/Distance	10 meters
Connectivity Port/ Charging Cable	Type-C
Driver	6mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 5.5 hours Charging case: Around 14.5 hours
Charging Time	Earbuds: Around 1.5 hours Charging case: Around 2 hours
App Support	No
Controls/Features	Play and pause a song, turn the volume up and down, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories	Charging case, user manual, USB cable, ear tips, warranty card
Price	Around 45 USD

GOVO GoBuds 410 Accessories

The earbuds come with the following accessories:

• Charging case.
• User manual.
• USB cable.
• Ear tips.
• Warranty card.

GOVO GoBuds 410 Manual | Instructions & Troubleshooting

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn off.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the GoBuds 410 earbuds. If a password is needed, type “0000” or “1234”.

After that, there is going to be a voice prompt, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

Step 7: Select the GoBuds 410 earbuds. If a password is needed, type “0000” or “1234”.

After that, there is going to be a voice prompt, and the pairing will be done.

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top circular part of the body of the earbuds.

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
• Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A white light on while on the charging case: The earbuds are charging.
• Said light turns off while on the charging case: The earbuds are fully charged.

Charging Case

• A white light flashing while charging: The case is charging.
• A white light on while charging: The case is fully charged.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above GOVO GoBuds 410 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.