GOVO-GoBuds-600-Manual-7

GOVO GoBuds 600 Manual | Everything You Have To Know!

The GOVO GoBuds 600 earbuds come with specs such as Environmental Noise Cancellation, Gaming mode support that gives less than 60ms latency, fast-charging support (10 minutes of charge to 180 minutes of playtime, Bluetooth 5.2 with 10 meters of working range, the IPX5 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this GOVO GoBuds 600 manual!

If you are interested in purchasing these earbuds, you can easily do it using the GOVO official website. Also, in case you are interested in giving the original manual a look, you can do it here.

GOVO GoBuds 600 Specs Sheet

ModelGOVO GoBuds 600
WeightEarbuds and charging case: Around 50 grams
Waterproof/IP ratings  IPX5
Bluetooth version          V5.2
Range/Distance10 meters
Connectivity Port/ Charging CableType-C
Driver  7mm
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: Around 7 hours
Charging case: Around 33 hours
Charging Time  Earbuds: Around 1 hour
Charging case: Around 1.5 hours
App Support     No
Controls/Features         Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, Gaming mode
Accessories       Charging case, user manual, USB cable, ear tips, warranty card
PriceAround 46 USD

GOVO GoBuds 600 Accessories

The earbuds come with the following accessories:

  • Charging case.
  • User manual.
  • USB cable.
  • Ear tips.
  • Warranty card.
GOVO-GoBuds-600-Manual-1
Credits: Unbox-d by Digit

GOVO GoBuds 600 Manual | Earbuds Pairing Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 4 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 5 seconds. After that, the earbuds will turn off.

GOVO-GoBuds-600-Manual-2

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

After that, they will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the GoBuds 600 earbuds. If a password is needed, type “0000” or “1234”.

After that, a red and blue light will start flashing, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

After that, they will be ready to pair with any device.

Step 7: Select the GoBuds 600 earbuds. If a password is needed, type “0000” or “1234”.

After that, a red and blue light will start flashing, and the pairing will be done.

GOVO-GoBuds-600-Manual-3

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

  • Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
  • Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds one time.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the Gaming mode: Press the multifunction touch button on any of the earbuds three times.

The volume can’t be controlled using the earbuds. You may control the volume via the connected device.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

GOVO-GoBuds-600-Manual-4

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the GoBuds 600 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

Step 5: Press the multifunction touch button on both earbuds 5 times. This will reset the earbuds.

Step 6: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Search for a new device.

Step 9: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

After that, they will be ready to pair with any device.

Step 10: Select the GoBuds 600 earbuds. If a password is needed, type “0000” or “1234”.

After that, a red and blue light will start flashing, and the pairing will be done.

GOVO-GoBuds-600-Manual-5

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

  • A red and blue light flashing: The earbuds are now connected.

Charging Case

  • The lights flashing while charging: The case is charging.
  • The lights on while charging: The case is fully charged.
GOVO-GoBuds-600-Manual-6

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

GOVO-GoBuds-600-Manual-7

FAQs

Are the GOVO GoBuds 600 waterproof?

No, the GOVO GoBuds 600 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Do the GOVO GoBuds 600 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the GOVO GoBuds 600 have a low latency/gaming mode?

Yes, these earbuds have a low latency/gaming mode.

Can the GOVO GoBuds 600 connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the GOVO GoBuds 600 noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

We hope you now know how to operate the earbuds from the above GOVO GoBuds 600 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.