GOVO GoBuds 945 Manual | Step-by-step Earbuds Guide

The GOVO GoBuds 945 earbuds come with specs such as Environmental Noise Cancellation, Gaming mode support for 60ms latency, the IPX5 sweat and dust-proof certification, about 7 hours of battery life on a single charge, Bluetooth 5.3, and much more. Learn how to use these earbuds using this GOVO GoBuds 945 manual!

If you are interested in purchasing these earbuds, you can easily do it using the GOVO official website. Also, in case you are interested in giving the original manual a look, you can do it here.

GOVO GoBuds 945 Specs Sheet

Model	GOVO GoBuds 945
Weight	Earbuds and charging case: Around 50 grams
Waterproof/IP ratings	IPX5
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/ Charging Cable	Type-C
Driver	12mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 7 hours Charging case: Around 45 hours
Charging Time	Earbuds: Around 1 hour Charging case: Around 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant, gaming mode
Accessories	Charging case, user manual, USB cable, ear tips, warranty card
Price	Around 60 USD

GOVO GoBuds 945 Accessories

The earbuds come with the following accessories:

• Charging case.
• User manual.
• USB cable.
• Ear tips.
• Warranty card.

GOVO GoBuds 945 Manual | How To Use These Earbuds?

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 3 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 6 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the GoBuds 945 earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing lights will turn off, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, and the earbuds will be ready to pair with any device.

Step 7: Select the GoBuds 945 earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing lights will turn off, and the pairing will be done.

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud three times.
• Play the previous song: While listening to music, press the multifunction touch button on the left earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds three times.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
• Activate the gaming mode: Press the multifunction touch button on any of the earbuds four times.

The volume can’t be controlled using the earbuds. You may control the volume via the connected smartphone or media device.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the GoBuds 945 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Take the earbuds out of the charging case. They will turn on.

Step 5: Press the multifunction touch button on both earbuds 5 times. This will reset the earbuds.

Step 6: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Step 7: Turn on Bluetooth on the desired device.

Step 8: Search for a new device.

Step 9: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing, and the earbuds will be ready to pair with any device.

Step 10: Select the GoBuds 945 earbuds. If a password is needed, type “0000” or “1234”.

After that, the flashing lights will turn off, and the pairing will be done.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A red and blue light flashing: The earbuds will be ready to pair with any device.
• Said red and blue light turns off: The earbuds are now connected.

Charging Case

• A blue light on while charging: The case is charging.
• Said blue light turns off while charging: The case is fully charged.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above GOVO GoBuds 945 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.