Haylou GT1 PRO Manual | Instructions & Troubleshooting 2021

The Haylou GT1 PRO have the IPX5 sweat and water-proof certification, a 7.2mm dynamic driver, a Qualcomm 3020 chipset, aptX, AAC, and SBC codecs, up to 4 hours of uninterrupted music playback, and much more. Learn how to use them with this new Haylou GT1 PRO Manual.

Haylou GT1 PRO Manual | Everything You Need To Know!

Haylou GT1 PRO Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take both earbuds out of the charging case. They will turn on, pair to each other, and will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Haylou-GT1 Pro”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take both earbuds out of the charging case. They will turn on, pair to each other, and will be ready to pair to any device.

Step 7: Select “Haylou-GT1 PRO_R”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Haylou GT1 PRO Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Haylou GT1 PRO Manual | How to Activate Mono Mode?

Step 1: Take the desired earbud out of the charging case. It will turn on automatically. When a light starts flashing slowly on it, it will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Haylou-GT1 Pro_R” or “Haylou-GT1 Pro_L”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

Haylou GT1 PRO Manual | How to Turn On and Off?

Turn on

Automatically: Take both earbuds out of the charging case. A white light will be on, and they will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 1 second. A white light will be on, and they will turn on.

Turn off

Automatically: Place the earbuds inside of the charging case. A red light will be on for 2 seconds, and they will turn off automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 4 seconds. A red light will be on for 2 seconds, and they will turn off.

Haylou GT1 PRO Manual | How to Activate ANC?

To activate the ANC feature on the Haylou GT1 PRO, all you have to do is to press the multifunction touch button on the right earbud three times.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1 second.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

Haylou GT1 PRO Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Haylou GT1 PRO Manual | How to Reset?

Step 1: Take both earbuds out of the charging case.

Step 2: Turn the earbuds off by pressing and holding the multifunction touch button on both earbuds for about 5 seconds.

Step 3: Press and hold the multifunction touch button in both earbuds for about 15 seconds, until a red and white light flashes three times in both earbuds.

Step 4: Place the earbuds into the charging case.

Step 5: Delete all “Haylou GT1 PRO” records on the connected device.

Step 6: After that, the resetting will be done.

Haylou GT1 PRO Manual | LED Light Status

Earbuds

• White light on: Earbuds turn on.
• Red light on for 2 seconds: Earbuds turn off.
• Red light on: Earbuds charging.
• White light on for 1 minute and the turns off: Earbuds fully charged.
• Red and white light flashing three times in both earbuds: Earbuds resetting.

Charging case

• Light flashing three times: Case has low battery.
• One light on: 0% to 25% of battery.
• Two lights on: 25% to 50% of battery.
• Three lights on: 50% to 75% of battery.
• Four lights on: 75% to 100% of battery.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Haylou GT1 PRO earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Haylou GT1 PRO Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Haylou company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!