Honor Earbuds 3 Pro Manual | Step-by-step User Guide

The Honor Earbuds 3 Pro earbuds come with specs such as a coaxial dual-driver design, Bluetooth 5.2 with 10 meters of work range, fast-charging support, about 6 hours of playtime with a single charge + up to 16 hours of total battery life with the charging case, app support, the IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

Honor Earbuds 3 Pro | Guide & Troubleshooting

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the function button on the side of the charging case for about 2 seconds. When a white light starts flashing, the earbuds will be ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select the “HONOR Earbuds 3 Pro” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the function button on the side of the charging case for about 2 seconds. When a white light starts flashing, the earbuds will be ready to pair with any device.

Step 3: Unlock the desired device.

Step 4: Go to the Settings.

Step 5: Go to “Bluetooth and other devices”.

Step 6: Turn on Bluetooth on the device.

Step 7: Click on “Add device”.

Step 8: Select the “HONOR Earbuds 3 Pro” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Turn the volume up: Swipe up the multifunction touch button on any of the earbuds.
• Turn the volume down: Swipe down the multifunction touch button on any of the earbuds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the ANC mode: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can get charged using a wireless charger.

How to Reset These Earbuds?

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the function button on the side of the charging case for about 6 seconds. When a red light starts flashing, the earbuds are restored to factory settings, and the earbuds re-enter the pairing mode.

What Do The Lights Mean?

Charging case

• A white light flashing: The earbuds are now in pairing mode.
• A red light flashing while resetting: The earbuds are resetting.
• A light on while charging: The case is charging.
• Said light turns off while charging: The case is fully charged.
• A light flashing while charging: There was a charging problem.

A Guide To The Honor Earbuds 3 Pro App

The Honor Earbuds 3 Pro can be used together with an app specially made for them, and it is the HONOR AI Space, which can be found in the Play Store and App Store.

When you connect the earbuds to the app, a large main screen will appear, where you can not only see the battery percentage of the earbuds and the charging case, but you can also control the different sound modes. On the other hand, you can also configure the equalizer, and you have the option to control the various functions of the earbuds, app settings, user guides, and the ability to update the earbuds.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Honor Earbuds 3 Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.