House of Marley Liberate Air Manual | How To Use?

The House of Marley Liberate Air come with specs such as up to 9 hours of battery life + 32 using the charging case, Bluetooth 5.0, 5.6mm dynamic drivers, 10 meters of working range, a frequency response of 20Hz to 20kHz, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

House of Marley Liberate Air | Pairing & Charging

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

A white light will start flashing, and they will pair with each other. When said light starts flashing slowly, it means that the earbuds are waiting to pair with any device.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select the “Liberate Air R” or “Liberate Air L” earbuds. If a password is needed, type “0000”.

Step 5: Accept the additional pairing request for “Headset” (the other earbud). If a password is needed, type “0000”.

After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

A white light will start flashing, and they will pair with each other. When said light starts flashing slowly, it means that the earbuds are waiting to pair with any device.

Step 6: Select the “Liberate Air R” or “Liberate Air L” earbuds. If a password is needed, type “0000”.

Step 7: Accept the additional pairing request for “Headset” (the other earbud). If a password is needed, type “0000”.

After that, the pairing will be done.

How to Pair To An Additional Device?

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the button on the charging case for about 2 seconds, so the earbuds enter pairing mode.

When a white light starts flashing slowly, it means that the earbuds are waiting to pair with any device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “Liberate Air R” or “Liberate Air L” earbuds. If a password is needed, type “0000”.

Step 6: Accept the additional pairing request for “Headset” (the other earbud). If a password is needed, type “0000”.

After that, the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause a song: Press the multifunction touch panel on the right earbud two times.
• Play the next song: Press the multifunction touch panel on the right earbud three times.
• Play the previous song: Press the multifunction touch panel on the left earbud three times.
• Answer an incoming call: Press the multifunction touch panel on the right earbud two times.
• End a current call: Press the multifunction touch panel on the right earbud two times.
• Reject an incoming call: Press the multifunction touch panel on the left earbud two times.
• Activate the voice assistant: Press the multifunction touch panel on the left earbud two times.

How to Control The Earbuds In Mono Mode?

• Play or pause a song: Press the multifunction touch panel on the selected earbud two times.
• Play the next song: Press the multifunction touch panel on the selected earbud three times.
• Answer an incoming call: Press the multifunction touch panel on the selected earbud two times.
• Reject an incoming call: Press the multifunction touch panel on the selected earbud two times.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Unpair And Reset The Earbuds?

Step 1: Place the earbuds into the charging case and close its lid.

Step 2: Delete the “Liberate Air R” or “Liberate Air L” earbuds pairing information from the connected device.

Step 3: Open the lid of the charging case.

Step 4: Press and hold the button on the charging case for about 6 seconds to clear the earbud’s memory. After that, a red and white light will start flashing, and the process will be done.

What Do The Lights Mean?

Earbuds

• A white light flashing: The earbuds are pairing with each other.
• A white light flashing slowly: The earbuds are waiting to pair with any device.
• A red light on while on the charging case: The earbuds are charging.
• Said red light turns off while on the charging case: The earbuds are fully charged.
• A white light flashing quickly: The earbuds have a low battery.
• A red and white light start flashing: The earbuds are resetting.

Charging case

• One light on: The case has around 25% of battery.
• Two lights on: The case has around 50% of battery.
• Three lights on: The case has around 75% of battery.
• Four lights on: The case has around 100% of battery.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above House of Marley Liberate Air manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.