House of Marley Redemption ANC | Step-by-step Pairing

The House of Marley Redemption ANC come with specs such as 8.6mm drivers, Bluetooth 5.0 + BLE, Active Noise Cancellation support, about 6 hours of battery life, 10 meters of working range, the IPX5 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

House of Marley Redemption ANC | Everything You Need To Know

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Turn on Bluetooth on the desired device.

Step 2: Open the lid of the charging case. After that, the earbuds will turn on automatically. A blue light will start flashing slowly and the earbuds will pair with each other.

When a red and blue light starts flashing in both earbuds, it means that they are now ready to pair with any device.

NOTE: If the earbuds don’t enter pairing mode automatically, then press and hold the button on the back of the charging case for about 2 seconds.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Redemption ANC L” or “Redemption ANC R”. If a password is needed, type “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. A blue light will start flashing slowly and the earbuds will pair with each other.

When a red and blue light starts flashing in both earbuds, it means that they are now ready to pair with any device.

NOTE: If the earbuds don’t enter pairing mode automatically, then press and hold the button on the back of the charging case for about 2 seconds.

Step 6: Select “Redemption ANC L” or “Redemption ANC R”. If a password is needed, type “0000”. After that, the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn on automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the right earbud two times.
• Auto-play the music: Place the earbud into the ear.
• Auto-pause the music: Take the earbud out of the ear.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Answer an incoming call: Press the multifunction touch button on the right earbud two times.
• End a current call: Press the multifunction touch button on the left earbud two times.
• Reject an incoming call: Press the multifunction touch button on the right earbud two times.
• Activate the voice assistant: Press the multifunction touch button on the left earbud two times.

How to Use The Earbuds In Mono Mode?

• Play the next song: Press the multifunction touch button on any of the earbuds three times.
• Auto-play the music: Place the earbud into the ear.
• Auto-pause the music: Take the earbud out of the ear.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.

How to Use The ANC And Ambience Modes?

To activate the ANC mode in these earbuds, all you have to do is to press the multifunction touch button on any of the earbuds three times.

By pressing and holding the multifunction touch button on any of the earbuds three times, the ANC and Ambience modes will be on.

By pressing and holding the multifunction touch button on any of the earbuds three times, the ANC and Ambience modes will turn off.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Clear The Earbuds’ Connection Record?

Step 1: Place the earbuds into the charging case.

Step 2: Close the lid of the charging case.

Step 3: Press and hold the button on the back of the charging case for about 6 seconds. After that, the connection record of the earbuds will be clear.

What Do The Lights Mean?

Earbuds

• A blue starts flashing slowly: The earbuds will pair with each other.
• A red and blue light flashing: The earbuds are now ready to pair with any device.
• A red light on while on the charging case: The earbuds are charging.
• Said red light turns off: The earbuds are fully charged.
• A red light flashes three times: The earbuds have a low battery.

Charging case

• One light on while charging: The case has around 25% of battery.
• Two lights on while charging: The case has around 50% of battery.
• Three lights on while charging: The case has around 75% of battery.
• Four lights on while charging: The case has around 100% of battery.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above House of Marley Redemption ANC manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.