HTC True Wireless Earbuds 1 Manual | Pairing & Charging

The HTC True Wireless Earbuds 1 earbuds come with specs such as Environmental Noise Cancellation, 10mm drivers and built-in microphones on each earbud, 8 hours of playtime and up to 32 hours using the charging case, Bluetooth 5.1 and a working connection range of 10 meters without obstacles, and much more. Learn how to use these earbuds using this HTC True Wireless Earbuds 1 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

HTC True Wireless Earbuds 1 Specs Sheet

Model	HTC True Wireless Earbuds 1
Weight	Earbuds: Around 4.5 grams each Charging case: Around 40.5 grams
Waterproof/IP ratings	IPX4
Bluetooth version	V5.1
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	10mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 8 hours Charging case: Around 24 hours
Charging Time	Earbuds: Around 1 hour Charging case: Around 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next song, answer and end a call, voice assistant
Accessories	Charging case, USB cable, user manual, ear tips, warranty card
Price	Around 15 USD

HTC True Wireless Earbuds 1 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.

HTC True Wireless Earbuds 1 Manual | Step-by-step, In-depth Guide

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the HTC TWS2 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 7: Select the HTC TWS2 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Control These Earbuds?

NOTE: The touch sensor is placed on the upper part of the body of the earbuds.

• Play and pause a song: Press the touch sensor on any of the earbuds one time.
• Play the next song: Press and hold the touch sensor on the right earbud for about 2 seconds.
• Play the previous song: Press and hold the touch sensor on the left earbud for about 2 seconds.
• Answer an incoming call: Press the touch sensor on any of the earbuds one time.
• End a current call: Press the touch sensor on any of the earbuds one time.
• Reject an incoming call: Press and hold the touch sensor on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the touch sensor on any of the earbuds three times.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Charging Case

• A red light flashes while charging: The case is charging.
• A red light on while charging: The case is fully charged.
• A blue light flashes: The case has a low battery level.
• A blue light on with the earbuds inside: The earbuds are charging.
• Said blue light turns off with the earbuds inside: The earbuds are fully charged.

How to Reset The Earbuds?

Step 1: Take the earbuds out of the case.

Step 2: Press the touch sensor on both earbuds three times. A beeping sound will stop.

Step 3: Place the earbuds into the case.

Step 4: Take the earbuds out of the case.

After that, the resetting will be done.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above HTC True Wireless Earbuds 1 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.