Huawei FreeBuds 2 Pro Manual | Step-by-step Pairing

The Huawei FreeBuds 2 Pro earbuds come with specs such as Bluetooth 5.0 with up to 10 meters of working range, a battery life of about 3 hours, speech recognition support, built-in microphones, a charging case with wireless charging support, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

Huawei FreeBuds 2 Pro Manual | All You Have To Know

How to Pair The Earbuds?

To Android or iOS devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Press and hold the function button on the back of the case for about 2 seconds, until a white light starts flashing. This means that the earbuds are now in pairing mode.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Select the FreeBuds 2 Pro earbuds. If a password is needed, type “0000”.

To Windows (PC)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Press and hold the function button on the back of the case for about 2 seconds, until a white light starts flashing. This means that the earbuds are now in pairing mode.

Step 8: Select the FreeBuds 2 Pro earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

How to Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On And Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control These Earbuds? – Stereo Mode

• Play or pause the music: Press the multifunction touch button on the right earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press the multifunction touch button on the right earbud two times.

The Earbuds’ Speech Recognition

When taking calls

Accept/reject: When a phone call comes in, you can say “Accept call” or “Reject call”, and the call will be processed accordingly.

When listening to music

Play/resume: In Standby mode, you can say “Play Music” or “Stop music”, and the music will play or pause accordingly.

Play/pause/volume: When playing music, you can say “Previous song” or “Next song”, and the music player will change tracks accordingly. You can also say “Volume louder” or “Volume softer”, and the music volume will adjust accordingly.

How to Activate The Mono Mode?

To charge the earbuds, all you have to do is to place them into the charging case. The earbuds will start charging automatically.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically. Also, it can get charged using a wireless charger.

What Do The Lights Mean?

Charging case

• A white light flashing: The earbuds are now in pairing mode.
• A green light while charging: The case has between 80% and 100% of battery.
• An orange light while charging: The case has between 20% and 80% of battery.
• A red light while charging: The case has between 0% and 20% of battery.
• A red light flashing: The earbuds are resetting.

How to Factory Reset The Earbuds?

Step 1: Place the earbuds into the charging case and keep the lid open.

Step 2: Press and hold the function button on the back of the case for a couple of seconds, until a red light starts flashing. The earbuds will now be restored to their factory settings.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Huawei FreeBuds 2 Pro manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.