Huawei FreeBuds Pro 2 Manual | How To Pair The Earbuds?

The Huawei FreeBuds Pro 2 earbuds come with specs such as ANC support, a battery life of about 6 hours + 12 hours using the charging case, Qi wireless charging support, Bluetooth 5.2, an 11mm dynamic driver + planar diaphragm driver, app support, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this manual!

Huawei FreeBuds Pro 2 Manual | Pairing & Charging

How to Pair The Earbuds?

To Android or iOS devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press and hold the function button on the side of the case for about 2 seconds, until a white light starts flashing. This means that the earbuds are now in pairing mode.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Select the HUAWEI FreeBuds Pro 2 earbuds. If a password is needed, type “0000”.

To Windows (PC)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Press and hold the function button on the side of the case for about 2 seconds, until a white light starts flashing. This means that the earbuds are now in pairing mode.

Step 8: Select the HUAWEI FreeBuds Pro 2 earbuds. If a password is needed, type “0000”. After that, the pairing will be done.

How to Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On And Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control These Earbuds? – Stereo Mode

• Play or pause the music: Press the multifunction handle on any of the earbuds one time.
• Turn the volume up: Swipe up the multifunction touch sensor on any of the earbuds.
• Turn the volume down: Swipe down the multifunction touch sensor on any of the earbuds.
• Play the next song: Press the multifunction handle on any of the earbuds two times.
• Play the previous song: Press the multifunction handle on any of the earbuds three times.
• Answer an incoming call: Press the multifunction handle on any of the earbuds one time.
• End a current call: Press the multifunction handle on any of the earbuds one time.
• Reject an incoming call: Press the multifunction handle on any of the earbuds two times.

Activate The Active Noise Canceling

To activate or deactivate the Active Noise Canceling feature in these earbuds, all you have to do is to press and hold the multifunction handle on any of the earbuds.

How to Activate The Mono Mode?

To charge the earbuds, all you have to do is to place them into the charging case. The earbuds will start charging automatically.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port. It will start charging automatically. Also, it can get charged using a wireless charger.

What Do The Lights Mean?

Charging case

• A white light flashing: The earbuds are now in pairing mode.
• A green light while charging: The case has a high level of battery.
• An orange light while charging: The case has a low level of battery.
• A red light flashing: The earbuds are resetting.

How to Factory Reset The Earbuds?

Step 1: Place the earbuds into the charging case and keep the lid open.

Step 2: Press and hold the function button on the side of the case for about 10 seconds, until a red light starts flashing. The earbuds will now be restored to their factory settings.

A Guide To The Huawei FreeBuds Pro 2 App

The Huawei FreeBuds Pro 2 can be used with an application, called HUAWEI AI Life. This application is available for iOS and Android devices.

• First page: When entering the application, there will be the possibility of adding to any device compatible with it. Likewise, you will be able to have a list of the devices already connected, which you will be able to access at any time.
• Second page: This is the page found after clicking on the desired device. Not only can you see the percentage of the battery in the earbuds and the charging case, but you can also modify the controls according to your needs. Likewise, the ability to turn the noise canceling feature on or off is available, as well as being able to update the firmware of the earbuds whenever there is a new update.

How to Update The Earbuds’ Firmware?

Step 1: Open the HUAWEI AI Life app.

Step 2: Tap on the earbuds.

Step 3: Tap on “Update”.

Step 4: Tap “Search”.

Step 5: Download and Install.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Huawei FreeBuds Pro 2 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.