iLuv TB100 Manual | Earbuds Guide & Troubleshooting

The iLuv TB100 earbuds come with specs such as Bluetooth 5.3 technology, the IPX6 waterproof certification, about 8 hours of battery life on a single charge and up to 20 hours using the charging case, support for the SBC audio codec, built-in microphones on each earbud, fast-charging support, and much more. Learn how to use these earbuds using this iLuv TB100 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

iLuv TB100 Specs Sheet

Model	iLuv TB100
Dimensions	Earbuds: 27.5 (W) x 18 (D) x 24 (H) mm Charging case: 67.4 (W) x 30.5 (D) x 31 (H) mm
Weight	Earbuds: About 4.6 grams per earbud Charging case: About 32.7 grams
Waterproof/IP ratings	IPX6
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 8 hours Charging case: Around 12 hours
Charging Time	Earbuds: Around 2 hours Charging case: Around 2 hours
App Support	No
Controls/Features	Play and pause a song, play the next song, turn the volume up and down, answer, end, and reject a call, voice assistant
Accessories	Charging case, USB cable, user manual, ear tips
Price	Around 20 USD

iLuv TB100 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.

iLuv TB100 Manual | All You Need To Know

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press and hold the touch sensor on both earbuds for about 2 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Manually: Press and hold the touch sensor on both earbuds for about 5 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the iLuv TB100 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically and pair with each other.

The earbuds will now be ready to pair with any device.

Step 7: Select the iLuv TB100 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Reset The Earbuds?

These earbuds are designed to automatically restore the connection with the last paired device when are turned on. The easiest way to restore the connection is to put the earbuds back in the case and take them out after 15 seconds.

How To Control These Earbuds?

NOTE: The touch sensor is placed on the middle part of the body of the earbuds.

• Play and pause a song: Press the touch sensor on any of the earbuds one time.
• Play the next song: Press the touch sensor on any of the earbuds two times.
• Turn the volume up: Press and hold the touch sensor on the right earbud.
• Turn the volume down: Press and hold the touch sensor on the left earbud.
• Answer an incoming call: Press the touch sensor on any of the earbuds two times.
• End a current call: Press the touch sensor on any of the earbuds two times.
• Reject an incoming call: Press and hold the touch sensor on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the touch sensor on any of the earbuds three times.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A light on while on the charging case: The earbuds are charging.
• Said light turns off while on the charging case: The earbuds are fully charged.

Charging Case

• One light on: The case has between 5% and 20% of battery.
• Two lights on: The case has between 25% and 50% of battery.
• Three lights on: The case has between 50% and 75% of battery.
• Four lights on: The case has between 75% and 100% of battery.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above iLuv TB100 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.