JadeAudio EW1 Manual | Pairing & Charging Instructions 2022

The JadeAudio EW1 SBC, AAC, and aptX Bluetooth codecs, the Qualcomm QCC3020 chip, CVC 8.0 noise cancellation technology, up to 21 hours of battery life, the IPX5 certification, and more. Learn how to use them with this new JadeAudio EW1 Manual.

JadeAudio EW1 Manual | Pairing & Charging Instructions

JadeAudio EW1 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing, and the earbuds will turn on automatically.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “JadeAudio EW1 L” or “JadeAudio EW1 R”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing, and the earbuds will turn on automatically.

Step 7: Select “JadeAudio EW1 L” or “JadeAudio EW1 R”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

JadeAudio EW1 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

JadeAudio EW1 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing, and the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the right earbud two times.
• Play the next song: Press and hold the multifunction touch button on the right earbud for about 2 seconds.
• Play the previous song: Press and hold the multifunction touch button on the left earbud for about 2 seconds.
• Turn the volume up: Press the multifunction touch button on the right earbud one time.
• Turn the volume down: Press the multifunction touch button on the left earbud one time.
• Answer an incoming call: Press the multifunction touch button on the right earbud two times.
• End a current call: Press the multifunction touch button on the right earbud two times.

JadeAudio EW1 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the JadeAudio EW1, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

JadeAudio EW1 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

JadeAudio EW1 Manual | How to Reset?

Step 1: Delete all “JadeAudio EW1 L” or “JadeAudio EW1 R” pairing records from the connected device.

Step 2: Take one of the earbuds from the charging case.

Step 3: Press its multifunction touch button 8 times, until a red and blue light starts flashing.

Step 4: Press its multifunction touch button 2 times, until a blue light starts flashing. After that, its resetting will be done.

Step 5: Repeat said steps with the other earbud.

JadeAudio EW1 Manual | LED Light Status

Earbuds

• A white light flashing: The earbuds turn on.
• A red and blue light flashing: The earbuds are resetting.
• A blue light flashing: The earbuds are resetting.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

JadeAudio EW1 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above JadeAudio EW1 Manual. Want to know anything about the earphone? Do not hesitate to ask in the comments section.