Jaybird Vista Manual | How To Pair These Earbuds?

The Jaybird Vista earbuds come with app support, 6 hours of battery life + 10 using the charging case, Bluetooth 5.0, 10 meters of working range, support for the A2DP, AVCRP, and SPP profiles, the amazing IPX7 water-proof certification, and much more. Learn how to use these earbuds using this manual!

Jaybird Vista Manual | Pairing Instructions

How to Pair The Earbuds?

To iOS and Android phones

Step 1: Place the earbuds into the charging case and close its lid.

Step 2: Open the lid of the charging case.

Step 3: Press and hold the button on the inside of the charging case for a couple of seconds. When a white light starts flashing, it means that the earbuds enter pairing mode and will be ready to pair with any device.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select “Jaybird Vista“. If a password is needed, type “0000”. After that, the flashing light on the case will turn off, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Place the earbuds into the charging case and close its lid.

Step 6: Open the lid of the charging case.

Step 7: Press and hold the button on the inside of the charging case for a couple of seconds. When a white light starts flashing, it means that the earbuds enter pairing mode and will be ready to pair with any device.

Step 8: Select “Jaybird Vista“. If a password is needed, type “0000”. After that, the flashing light on the case will turn off, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. Also, you can press the multifunction touch button on any of the earbuds one time, or even press and hold.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on any of the earbuds.

How to Control? / How to Operate? – Instructions

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on any of the earbuds two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds two times.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Clear The Pairing Records?

Soft Reset

Step 1: Place the earbuds into the charging case.

Step 2: Close the lid of the charging case.

Step 3: After that, connect the case to a power supply.

This will turn your earbuds off and perform a soft reset.

Factory/Hard Reset

Step 1: Delete all “Jaybird Vista” pairing information on the connected device.

Step 2: Place both earbuds into the charging case and close the lid.

Step 3: Open the lid of the case.

Step 4: Press and hold the button on the inside of the case for a couple of seconds, until a white light starts flashing.

Step 5: While the charging case LED is flashing white, press the button on the case two times. A pink light will start flashing.

Step 6: When said pink light turns off, close the lid. After that, the resetting will be done.

What Do The Lights Mean?

Charging case

• A white light starts flashing: The earbuds will be ready to pair with any device.
• Said white light turns off: The earbuds are now connected.
• A white light flashing with the earbuds inside: The earbuds are charging.
• A white light on with the earbuds inside: The earbuds are fully charged.
• A red light on: The case has a really low battery.
• A white light flashing: The case is charging.
• A white light on: The case is fully charged.
• A white light starts flashing while resetting: The earbuds are resetting.
• A pink light starts flashing while resetting: The earbuds are resetting.
• Said pink light turns off: The resetting is complete.

A Guide To Jaybird Vista APP

The Jaybird Vista earbuds have an app specially made to configure them and learn more about them, called Jaybird App, which is available in the Play Store and App Store, for Android and iOS devices.

When you download the app and connect to the earbuds, the first thing that will appear is the connected device, as well as the percentage of its battery. Also, being a single page that can be slid up and down, several options appear. Not only can you configure the sound, but you can also configure the ANC feature (if available) and activate the Find My Earbud.

In addition to that, at the bottom, there are the general settings:

• Button Controls: The various controls that the earbuds have available can be changed and configured.
• Voice assistant: Here, you can set up the voice assistant in an easy and fast way.
• More settings: This is the place where the normal settings of the earbuds are found, such as language, auto-off, and much more.
• Support: Here there is not only information about the earbuds, but it is also the place where they can be updated, in addition to various tutorials.
• Shop Jaybird: It’s a virtual store, where you can buy accessories for the earbuds.
• Jaybird stories: This is a way that the company chose to be more connected with users, in addition to making important announcements about their devices.

How to Update The Earbuds?

Step 1: Place the earbuds in the charging case and leave the case lid open.

Step 2: Open the Jaybird App.

Step 3: Slide down and select More Settings. The earbuds’ firmware version will be displayed after the App build number.

If there is a firmware update available, the Jaybird App will prompt you to install it.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Jaybird Vista manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.