JBL Tune 130NC TWS Manual | Instructions & Troubleshooting 2022

The JBL Tune 130NC TWS comes with Active Noise Cancelling technology, a 10mm dynamic driver, a battery life of around 8 hours + 32 hours using the charging case, the IPX4 splash, and dust-proof certification, a specialized app, and much more. Learn how to use them with this new JBL Tune 130NC TWS Manual.

JBL Tune 130NC TWS Manual | Everything You Need To Know!

JBL Tune 130NC TWS Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Press the multifunction touch button on both earbuds one time and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will be ready to pair with any device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “JBL Tune 130NC TWS”. If a password is needed, type “0000”. At this moment, a blue light will start flashing in the earbuds.

Step 5: After that, a blue light will turn on, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 7: Press the multifunction touch button on both earbuds one time and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will be ready to pair with any device.

Step 8: Select “JBL Tune 130NC TWS”. If a password is needed, type “0000”. At this moment, a blue light will start flashing in the earbuds.

Step 9: After that, a blue light will turn on, and the pairing will be done.

JBL Tune 130NC TWS Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

JBL Tune 130NC TWS Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the right earbud one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the right earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Mute or unmute a call: Press and hold the multifunction touch button on any of the earbuds for 5 seconds during the call.
• Activate Talkthru: Press the multifunction touch button on the left earbud two times.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for 5 seconds.

JBL Tune 130NC TWS Manual | How to Activate ANC?

To activate or deactivate the ANC in the JBL Tune 130NC TWS, all you have to do is to press the multifunction touch button on the left earbud one time.

JBL Tune 130NC TWS Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the JBL Tune 130NC TWS, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

JBL Tune 130NC TWS Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

JBL Tune 130NC TWS Manual | How to Reset?

Step 1: Enter your device’s Bluetooth settings and forget the JBL Tune 130NC TWS.

Step 2: Press the multifunction touch button on both earbuds 2 times and, after, press and hold the multifunction touch button on both earbuds for 5 seconds. A blue light will start flashing.

Step 3: After that, the resetting will be done.

JBL Tune 130NC TWS Manual | LED Light Status

Earbuds

• Blue light flashing: Earbuds connect to the device.
• Blue light on: Earbuds connected to any device.
• Blue light flashing slowly: The connection between earbuds and the device was wrong.
• Blue light flashing when resetting: Earbuds are resetting.

Charging case

• One light flashing: Case has a low battery.
• One light on and one flashing while charging: Case charging.
• Lights turn off while charging: Case fully charged.

A Guide To JBL Tune 130NC TWS APP

The JBL Tune 130NC TWS can be used with an application, called JBL HEADPHONES. This application is available in the Apple Store and in the Play Store for iOS and Android devices. When opening the application, the first thing we have to do is connect our earbuds, and after that, three specific pages:

• First page: This is the first page of this application, and you will be able to see the connected device.
• Second page: On the second page, we will not only find the connected device, but also the battery percentages of both earbuds. Also, you will find options like enable or disable the ANC, enable or disable the Ambient Sound Control, and the Smart Audio and Video feature.
• Third page: On the third and last page, you will be able to configure the controls of the earbuds, enable or disable the auto turn-off of the earbuds, the Find My Earbud feature, and information about the earbuds, and the firmware version.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

JBL Tune 130NC TWS earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above JBL Tune 130NC TWS Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.