JBL-Vibe-200TWS-Manual-6

JBL Vibe 200TWS Manual | Instructions & Troubleshooting 2022

The JBL Vibe 200TWS have a dynamic driver size of 8mm, up to 5 hours of battery life + 10 hours using the charging case, Bluetooth 5.0, fast-charging support, A2DP, AVRCP, HFP, HSP codecs, and much more. Learn how to use them with this new JBL Vibe 200TWS Manual.

JBL Vibe 200TWS Manual | Everything You Need To Know!

JBL Vibe 200TWS Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. When a blue light starts flashing, the earbuds will be ready to pair to any device.

Step 1: Go to the device’s Bluetooth settings.

Step 3: Select “JBL Vibe200TWS”. If a password is needed, type “0000”.

Step 4: After that, a blue light will stay on and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. When a blue light starts flashing, the earbuds will be ready to pair to any device.

Step 7: Select “JBL Vibe200TWS”. If a password is needed, type “0000”.

Step 8: After that, a blue light will stay on and the pairing will be done.

JBL-Vibe-200TWS-Manual-1

JBL Vibe 200TWS Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

JBL Vibe 200TWS Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

JBL-Vibe-200TWS-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds one time.
  • Play the next song: Press the multifunction touch button on any of the earbuds two times.
  • Play the previous song: Press the multifunction touch button on any of the earbuds three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
JBL-Vibe-200TWS-Manual-3

JBL Vibe 200TWS Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the JBL Vibe 200TWS, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

JBL Vibe 200TWS Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

JBL-Vibe-200TWS-Manual-4

JBL Vibe 200TWS Manual | How to Reset?

Step 1: Forget the earbuds in the connected device.

Step 2: Take the earbuds out of the charging case.

Step 3: Press and hold the multifunction touch button on both earbuds for about 5 seconds, or until a blue and white light starts flashing slowly.

Step 4: After that, the resetting will be done.

JBL Vibe 200TWS Manual | LED Light Status

Earbuds

  • Blue light flashing: Earbuds are ready to pair to any device.
  • Blue light on: Earbuds connected to device.
  • Blue and white light flashing slowly: Earbuds resetting.
  • No light on: Earbuds have low battery.
  • White light flashing: Earbuds have half battery.
  • White light on: Earbuds have all battery.

Charging case

  • Red light flashing while charging: Case has low battery.
  • Orange light flashing while charging: Case has half of battery.
  • Green light flashing while charging: Case has almost all battery.
  • Light turns off while charging: Case is fully charged.
  • Red light on: Case has low battery.
  • Orange light on: Case has half of battery.
  • Green light flashing on: Case has almost all battery.
JBL-Vibe-200TWS-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

JBL Vibe 200TWS earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

JBL-Vibe-200TWS-Manual-6

FAQs

Are JBL Vibe 200TWS waterproof?

The JBL Vibe 200TWS have the IPX4 certification, which means they’re dustproof, splash and sweat-resistant.

Does JBL Vibe 200TWS have a microphone?

Yes, the JBL Vibe 200TWS have integrated microphones.

Do JBL Vibe 200TWS have low latency/gaming mode?

No, the JBL Vibe 200TWS don’t have a low latency/gaming mode.

How to know when JBL Vibe 200TWS are fully charged?

The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged.

Can JBL Vibe 200TWS connect to PC and Laptop?

Yes, the JBL Vibe 200TWS can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above JBL Vibe 200TWS Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.