JBL-Wave-Buds-Manual-9

JBL Wave Buds Manual | Step-by-step Earbuds Manual

The JBL Wave Buds earbuds come with specs such as app support, Bluetooth 5.2, about 10 of connection working range, a battery life of about 8 hours with less than 2 hours of charging time, 8mm dynamic drivers + built-in microphones in each earbud, the IPX4 sweat and dust-proof certification, and much more. Learn how to use these earbuds using this manual!

If you want to give the original manual a look, you can do it here.

JBL Wave Buds Specs Sheet

ModelJBL Wave Buds
WeightEarbuds: About 4.5 grams each
Charging case: About 34 grams
Waterproof/IP ratings  IPX4
Bluetooth version          V5.2
Range/Distance10 meters
Driver8mm
Audio DecodingAAC
Connectivity Port/Charging CableType-C
Speaker frequency response20Hz – 20kHz
Battery Life       Earbuds: About 8 hours
Charging case: About 16 hours
Charging Time  Earbuds: About 1.5 hours
Charging case: About 2 hours
App Support     Yes, JBL Headphones
Controls/Features         Play or pause music, play the next song, turn the volume up and down, answer and end a call, mute or unmute the microphone, voice assistant
Accessories       Charging case, USB cable, ear tips, quick start guide/safety sheet, warranty/warning
PriceAround 60 USD

JBL Wave Buds Accessories

The earbuds come with the following accessories:

  • Charging case.
  • USB cable.
  • Ear tips.
  • Quick start guide/safety sheet.
  • Warranty/warning.
jbl-wave-buds-manual-0

JBL Wave Buds Manual | How To Pair These Earbuds?

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Take both earbuds out of the charging case. After that, the earbuds will turn on automatically. Also, they will enter pairing mode.

If the earbuds don’t enter pairing mode automatically, then press the multifunction touch button on any of the earbuds one time, and then press and hold for about 5 seconds.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “JBL WAVE BUDS” earbuds. If a password is needed, write “0000”. A blue light will start flashing.

After that, the flashing light will stay still, and the pairing will be done.

To PC (Windows)

Step 1: Take both earbuds out of the charging case. After that, the earbuds will turn on automatically. Also, they will enter pairing mode.

If the earbuds don’t enter pairing mode automatically, then press the multifunction touch button on any of the earbuds one time, and then press and hold for about 5 seconds.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “JBL WAVE BUDS” earbuds. If a password is needed, write “0000”. A blue light will start flashing.

After that, the flashing light will stay still, and the pairing will be done.

JBL-Wave-Buds-Manual-1

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the earbuds into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Take both earbuds out of the charging case. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

JBL-Wave-Buds-Manual-3

How to Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds. Where the JBL logo is located.

  • Play or pause the music: Press the multifunction touch button on the right earbud one time.
  • Turn the volume up: Press the multifunction touch button on the left earbud one time.
  • Turn the volume down: Press the multifunction touch button on the left earbud two times.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the right earbud three times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Mute or unmute the microphone: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
JBL-Wave-Buds-Manual-4

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

JBL-Wave-Buds-Manual-5

How to Factory Reset These Earbuds?

Step 1: Delete all “JBL WAVE BUDS” earbuds pairing information on the connected device.

Step 2: Take both earbuds out of the charging case.

Step 3: Press the multifunction touch button on both earbuds two times.

Step 4: Press and hold the multifunction touch button on both earbuds for about 5 seconds.

Step 5: Place both earbuds into the charging case.

After that, the resetting will be done.

JBL-Wave-Buds-Manual-6

What Do The Lights Mean?

Earbuds

  • A blue light flashing: The earbuds are pairing to the device.
  • A blue light on: The earbuds are now paired.
  • A blue light flashing slowly while pairing: There was a pairing error.
  • A white light flashing while on the charging case: The earbuds are charging.
  • Said white light stays on while on the charging case: The earbuds are fully charged.

Charging case

  • A red light flashing while charging: The case has a low battery level.
  • An orange light flashing while charging: The case has a medium battery level.
  • A green light flashing while charging: The case has a high level.
  • All lights turn off while charging: The case is fully charged.
  • A red light on: The case has a low battery level.
  • An orange light on: The case has a low battery level.
  • A green light on: The case has a low battery level.
JBL-Wave-Buds-Manual-7

A Guide To The JBL Wave Buds App

The JBL Wave Buds can be used with an application, called JBL HEADPHONES. This application is available in the Apple Store and in the Play Store for iOS and Android devices. When opening the application, the first thing we have to do is connect our earbuds, and after that, three specific pages:

  • First page: This is the first page of this application, and you will be able to see the connected device.
  • Second page: On the second page, we will not only find the connected device, but also the battery percentages of both earbuds. Also, you will find options like enabling or disabling the ANC, enabling or disabling the Ambient Sound Control, and the Smart Audio and Video feature.
  • Third page: On the third and last page, you will be able to configure the controls of the earbuds, enable or disable the auto turn-off of the earbuds, the Find My Earbud feature, and information about the earbuds, and the firmware version.
JBL-Tour-Pro-+-Manual-6

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

JBL-Wave-Buds-Manual-9

FAQs

Are the JBL Wave Buds waterproof?

No, the JBL Wave Buds are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant.

Do the JBL Wave Buds have a microphone?

Yes, the earbuds come with integrated microphones.

Do the JBL Wave Buds have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the JBL Wave Buds connect to PCs and laptops?

Yes, these earbuds can connect to PCs and laptops.

Are the JBL Wave Buds noise-canceling?

No, these earbuds don’t come with noise-cancellation technology.

How to know when the JBL Wave Buds are fully charged?

When the earbuds are charging, a white light is flashing. When fully charged, said light stays on.

We hope you now know how to operate the earphone from the above JBL Wave Buds manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.