JLab Epic Air Sport ANC Manual | Pairing & Troubleshooting 2022

The JLab Epic Air Sport ANC have an 8mm dynamic driver, an amazing total battery life of 15 hours + 40 hours using the charging case, the ANC feature, a specialized app, the IPX6 waterproof certification, and much more. Learn how to use them with this new JLab Epic Air Sport ANC Manual.

JLab Epic Air Sport ANC Manual | Everything You Need To Know!

JLab Epic Air Sport ANC Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 2: Press and hold the multifunction touch button on both earbuds for about 3 seconds, and when a blue and white light starts flashing, they will be ready to pair to any device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “JLab Epic Air Sport ANC”. If a password is needed, type “0000”.

Step 5: After that, a white light will turn on in the earbuds and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 7: Press and hold the multifunction touch button on both earbuds for about 3 seconds, and when a blue and white light starts flashing, they will be ready to pair to any device.

Step 8: Select “JLab Epic Air Sport ANC”. If a password is needed, type “0000”.

Step 9: After that, a white light will turn on in the earbuds and the pairing will be done.

JLab Epic Air Sport ANC Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

JLab Epic Air Sport ANC Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on the right earbud two times.
• Turn the volume up: Press the multifunction touch button on the right earbud one time.
• Turn the volume down: Press the multifunction touch button on the left earbud one time.
• Play the next song: Press and hold the multifunction touch button on the right earbud for 2 seconds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press the multifunction touch button on any of the earbuds two times + hold for 1 second.
• Change between the Equalizer modes: Press the multifunction touch button on any of the earbuds three times.
• Activate the voice assistant: Press the multifunction touch button on the left earbud two times.

JLab Epic Air Sport ANC Manual | How to Activate ANC Mode?

To activate or deactivate the ANC mode in the JLab Epic Air Sport ANC, all you have to do is to press and hold the multifunction touch button on the left earbud for about 2 seconds.

JLab Epic Air Sport ANC Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the JLab Epic Air Sport ANC, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

JLab Epic Air Sport ANC Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

JLab Epic Air Sport ANC Manual | LED Light Status

Earbuds

• Blue and white light flashing: Earbuds are ready to connect to any device.
• White light on: Earbuds connected to the device.
• Blue light flashing 3 times: Earbuds resetting.
• One earbud’s light turns solid white and the other ones blink blue and white: Resetting is done.

Charging case

• Blue lights on: Earbuds charging.
• Blue lights turn off: Earbuds fully charged.
• White light on: Case charging.
• White light turns off: Case fully charged.

JLab Epic Air Sport ANC Manual | Voice Prompts

• “Hello”: Earbuds turn on.
• “Ready to pair”: The earbuds are ready to pair with any device.
• “Be Aware”: Hear your surroundings
• “ANC on”: Noise-canceling turns on.
• “ANC off”: Noise-canceling turns off.
• “Bluetooth Connected”: Earbud is connected to the device.
• “Battery Full”: Earbuds have 100% to 75% of battery.
• “Battery Medium”: Earbuds have 75% to 25% of battery.
• “Low Battery”: Earbuds have less than 25% of battery (when power decreases to 10%,
• “Low Battery” will play one time).
• “Goodbye”: Earbuds turn off.

JLab Epic Air Sport ANC Manual | How to Reset?

Step 1: Enter your Bluetooth device settings and forget the JLab Epic Air Sport ANC earbuds.

Step 2: Keep the earbuds on the charging case.

Step 3: In one earbud, press the multifunction touch button seven times, or until a blue light flashes 3 times.

Step 4: Repeat on the other earbud: press the multifunction touch button seven times, or until a blue light flashes 3 times.

Step 5: Take both earbuds out of the charging case. Wait for one earbud’s light to turn solid white and the other ones to blink blue and white. After that, the resetting will be done.

A Guide To JLab Epic Air Sport ANC APP

The JLab Epic Air Sport ANC can be used with an application, called JLab Air ANC. This application is available in the Apple Store and in the Play Store for iOS and Android devices. When opening the application, the first thing we have to do is connect our earbuds, and it has features and settings such as:

• Noise Canceling and Be Aware: In the earbuds themselves, you can only turn the ANC on and off, while in the app it will be able to increase or decrease. Likewise, you can also increase the amount of outside noise you let in by increasing or decreasing Be Aware settings.
• Equalizer: Fine-tune your sound by adjusting the equalizer settings. Jlab earbuds come set with three default settings, called Custom EQ3 Sound, which features Jlab Signature, balanced and bass boost, and a 4th option ‘custom’. In this app, you can test and set your own equalizer settings by adjusting bass, mid-range, and treble. You can adjust each of the four presets, which includes a ‘custom’ option with levels starting flat.
• Controls: Jlab products come with controls on each earbud that control anything from the volume, track changes, play/pause, and more. If you’d like to switch the settings, you can customize your controls further via the app.
• Product updates and more: Lastly, via the app you can also do updates to your products when available. Likewise, it has other features, such as toggling on/off the autoplay sensors and checking the exact % of battery life in each earbud.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

JLab Epic Air Sport ANC earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above JLab Epic Air Sport ANC Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.