Home Audiophile Earbuds Manuals The JLab Go Air Tones earbuds come with a battery life of 8 hours and a charging case of 2 hours, Bluetooth 5.1, a working range of 10 meters, a 6mm dynamic driver, support for the HSP/HFP/A2DP/AVRCP codecs, the IPX4 sweat and dust-proof certification, and more. Learn how to use these earbuds using this manual! What's Inside ToggleHow To Pair The JLab Go Air Tones?How to Pair The Earbuds?How to Wear?How to Turn On and Off?How to Control? / How to Operate? – InstructionsHow to Custom The EQ Modes?How to Activate The Mono Mode?How to Charge The Earbuds?What Do The Lights Mean?The Earbud’s Voice PromptsHow to Reset The Earbuds?Some Common Earbuds Problems & TroubleshootingFAQs How To Pair The JLab Go Air Tones? How to Pair The Earbuds? To iOS and Android Phones Step 1: Open the lid of the charging case and take the earbuds out. After that, a “Hello” voice prompt will sound, and the earbuds will turn on automatically. When a blue and white light starts flashing, and a “Ready to pair” voice prompt sounds, that means that the earbuds will be ready to pair with any device. Step 2: Turn on Bluetooth on the desired device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “JLab GO Air Tones”. If a password is needed, type “0000”. After that, a white light will start flashing, a “Bluetooth connected” voice prompt will sound, and the pairing will be done. To PC (Windows) Step 1: Turn on Bluetooth on the desired device. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case and take the earbuds out. After that, a “Hello” voice prompt will sound, and the earbuds will turn on automatically. When a blue and white light starts flashing, and a “Ready to pair” voice prompt sounds, that means that the earbuds will be ready to pair with any device. Step 6: Select “JLab GO Air Tones”. If a password is needed, type “0000”. After that, a white light will start flashing, a “Bluetooth connected” voice prompt will sound, and the pairing will be done. Credits: JLab How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How to Turn On and Off? Turn on: Open the lid of the charging case and take the earbuds out. After that, a “Hello” voice prompt will sound, and the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case. After that, a “Goodbye” voice prompt will sound, and the earbuds will turn off automatically. Credits: iMore How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on the right earbud two times. Play the next song: Press and hold the multifunction touch button on the right earbud for about 1 second. Play the previous song: Press and hold the multifunction touch button on the left earbud for about 1 second. Turn the volume up: Press the multifunction touch button on the right earbud one time. Turn the volume down: Press the multifunction touch button on the left earbud one time. Answer an incoming call: Press the multifunction touch button on any of the earbuds one time. End a current call: Press the multifunction touch button on any of the earbuds two times. Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second. Activate the voice assistant: Press the multifunction touch button on the left earbud two times. Credits: JLab How to Custom The EQ Modes? To custom the three EQ modes in these earbuds (JLab Signature, Balanced, and Bass Boost), all you have to do is to press the multifunction touch button on any of the earbuds three times. Credits: JLab How to Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How to Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Credits: JLab What Do The Lights Mean? Earbuds A blue and white light starts flashing: The earbuds are ready to pair with any device. A white light flashing: The earbuds are now connected. A blue light flashing four times: The earbuds are resetting. Charging case A red light flashing with the earbuds inside: The earbuds have less than 25% of battery. A red light on with the earbuds inside: The earbuds have between 25% and 100% of battery. A red light flashing: The case has less than 25% of battery. A red light on: The case has between 25% and 100% of battery. A blue light flashing: The case is charging. A blue light on: The case is fully charged. The Earbud’s Voice Prompts “Hello”: The earbuds are on. “Ready to pair”: The earbuds are ready to pair with any device. “Bluetooth connected”: The earbuds are now connected. “Battery full”: The earbuds have between 100% and 75% of battery. “Battery medium”: The earbuds have between 75% and 25% of battery. “Low battery”: The earbuds have less than 25% of battery. When the power decreases to 10%, “Low Battery” will play one time. “Goodbye”: The earbuds are off. Credits: JLab How to Reset The Earbuds? Step 1: Delete all “JLab GO Air Tones” pairing information from the connected device. Step 2: Place the earbuds into the charging case and keep the lid open. Step 3: Press the multifunction touch button in one of the earbuds seven times. A blue light will flash four times. Step 4: Press the multifunction touch button on the other earbud seven times. A blue light will flash four times. Step 5: Take the earbuds out of the charging case. After that, the resetting will be done. Credits: JLab Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working rangeSee alsoXiaomi Redmi AirDots 3 Manual | Pairing & TroubleshootingGines·July 23, 2022·3 Comments If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Android Community FAQs Are the JLab Go Air Tones waterproof? No, the JLab Go Air Tones are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant. Do the JLab Go Air Tones have a microphone? Yes, the earbuds come with integrated microphones. Do the JLab Go Air Tones have a low latency/gaming mode? No, these earbuds don’t have a low latency/gaming mode. Can the JLab Go Air Tones connect to PCs and laptops? Yes, these earbuds can connect to PCs, laptops, and even tablets. Are the JLab Go Air Tones noise-canceling? No. These earbuds don’t come with noise-cancellation technology. How to know when the JLab Go Air Tones are fully charged? When the earbuds are charging, a red light flashes on the case. When fully charged, said light stays on. We hope you now know how to operate the earphone from the above JLab Go Air Tones manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you have other Jlab earbuds or are interested in learning about other models, the company has a page specially created to contain the user manuals for some of its earbuds, headphones, and more.