Jlab Jbuds Air Executive Manual & Guide

Being known for its incredible products, Jlab increasingly surprises its users with the launch of true wireless earbuds, which have incredible popularity, as well as the Jlab Go Air. Today we will show you the user manual for one of these pairs of earbuds, the Jlab Jbuds Air Executive, so welcome to this new Jlab Jbuds Air Executive Manual including pairing, charging, reset, and issues.

Jlab Jbuds Air Executive Manual & Guide | All You Need To Know!

Jlab Jbuds Air Executive Manual – Pairing / How to Pair?

Step 1: Take both earbuds out of the charging case and remove the stickers.

Step 2: Press and hold the touch sensors on both earbuds for 3 seconds to turn them on. After that, the LED lights on the left earbud will turn solid white, and the LED light on the right earbud will blink blue and white, indicating ready to pair to your device.

Step 3: Turn on the Bluetooth in the device you want to connect them.

Step 4: Refresh the Bluetooth page and select “Jlab Jbuds Air Executive” in your device’s Bluetooth settings to connect. The voice prompt “Bluetooth connected” will sound followed by solid white lights, which will indicate they are connected.

Jlab Jbuds Air Executive Manual – What’s the battery life of the Jlab Jbuds Air Executive?

The Jlab Jbuds Air Executive have a battery life of about 6.5 hours.

Jlab Jbuds Air Executive Manual – Charging / How to Charge?

Charging the earbuds

Step 1: Place the earbuds into the charging case to turn them off. They will automatically start charging and the case LED lights will show that the earbuds are charging.

Step 2: When a blue LED light turns on; the earbuds will begin the charging process.

Step 3: When the blue LED lights turn off, the earbuds will be fully charged.

Step 4: After that, the earbuds will automatically power on and connect to the device when removed.

Charging the charging case

To charge the charging case, all you have to do is to connect the case to a computer or USB 5V 1A (or less) output device.

Jlab Jbuds Air Executive Manual – What’s the charging time of the Jlab Jbuds Air Executive?

The earbuds themselves take 1.5 hours to fully charge, while the charging case takes up to 2.5 hours to fully charge.

Jlab Jbuds Air Executive Manual – Control Guide / How to Use?

• Manually power on the earbuds: Press and hold the touch sensor on any of the earbuds for 3 seconds.
• Turn the volume up: Single tap the touch sensor on the right earbud.
• Turn the volume down: Single tap the touch sensor on the left earbud.
• Play of pause music: Double tap the touch sensor on the right earbud.
• Play next song: Press and hold the touch sensor on the right earbud for 1 second.
• Play previous song: Press and hold the touch sensor on the left earbud for 1 second.
• Answer an incoming call: Single tap the touch sensor on the right earbud.
• Hang-up a phone call: Double tap the touch sensor on the right earbud.
• Reject an incoming call: Press and hold the touch sensor on the right earbud for 1 second.
• Custom EQ modes: Triple tap the touch sensor on any of the earbuds.
• Activate Siri (iOS) or Ok Google (Android): Double tap the touch sensor on the left earbud.

Jlab Jbuds Air Executive Manual – What it means?

LED status on the earbuds

• LED lights blinking blue and white: Earbuds ready to connect.
• LED lights solid white: Connection successful.

LED status on the charging case

• LED lights solid blue: Case / earbuds charging.

Jlab Jbuds Air Executive Manual – How to factory reset the Jlab Jbuds Air Executive?

Step 1: Enter your Bluetooth device settings and forget the “Jlab Jbuds Air Executive” device, and turn off Bluetooth.

Step 2: Open the charging case lid and leave both earbuds inside. Starting with ONE earbud, quickly press the multifunction button 4 times. A light will blink blue three times to turn solid blue. Keep the earbuds in the charging case.

Step 3: Repeat with the other earbud. Quickly press the button 4 times. A light will blink blue three times to turn solid blue.

Step 4: Take both earbuds out of the charging case and keep them within 2 inches from each other. Wait for the left earbud to turn solid white and the right earbud to blink blue and white.

Step 5: You are now ready to pair to your Bluetooth device.

Jlab Jbuds Air Executive Manual – App Guide

Jlab presented its users with a special application to control their earbuds through Android or iOS phones, and it has features and settings such as:

Noise Canceling and Be Aware: In the earbuds themselves, you can only turn the ANC on and off, while in the app it will be able to increase or decrease. Likewise, you can also increase the amount of outside noise you let in by increasing or decreasing Be Aware settings.

Equalizer: Fine-tune your sound by adjusting the equalizer settings. Jlab earbuds come set with three default settings, called Custom EQ3 Sound, which features Jlab Signature, balanced and bass boost, and a 4th option ‘custom’. In this app, you can test and set your own equalizer settings by adjusting bass, mid-range, and treble. You can adjust each of the four presets, which includes a ‘custom’ option with levels starting flat.

Controls: Jlab products come with controls on each earbud that control anything from the volume, track changes, play/pause, and more. If you’d like to switch the settings, you can customize your controls further via the app.

Products updates and more: Lastly, via the app you can also do updates to your products when available. Likewise, it has other features, such as toggle on/off the autoplay sensors and checks the exact % of battery life in each earbud.

Jlab Jbuds Air Executive Manual – How to turn on and off?

Turn on the earbuds

• Using the charging case: Take the earbuds out of the charging case.
• Using the earbuds themselves: Press and hold the touch sensors on both earbuds for 3seconds.

Turn off the earbuds

• Using the charging case: Place the earbuds into the charging case.
• Without the charging case: Enter your Bluetooth device settings and disconnect the Jlab Jbuds Air Executive. After that, the earbuds will power off automatically after 3 minutes.

Troubleshooting

Jlab Jbuds Air Executive keeps disconnecting

The Jlab Jbuds Air Executive can be disconnected due to certain factors, such as:

• Use them outside the valid range (around 10 meters).
• The Bluetooth module in the device that the earbuds are connected to is very old.
• In case of being connected to a computer, there is a problem in the connection settings in the version of Windows used.
• In case of being connected to a smartphone, there is a problem in the connection configuration in the OS version used.

Jlab Jbuds Air Executive keeps cutting sound

In case in the Jlab Jbuds Air Executive the sound keeps cutting, it can happen due to certain factors, such as:

• Pairing problems between the earbuds or connection problems between the earbuds and the device.
• The audio file is not supported or cannot be played in sound.
• The Bluetooth module in the device that the earbuds are connected to is very old.

If this happens, it is highly recommended to reset the earbuds.

Jlab Jbuds Air Executive left or right earbud not working

If you realize that one of the earbuds is not working, you should make sure of the following:

• Make sure the earbuds are not in Mono Mode, because when this is on, only one of the earbuds will work.
• The non-working earbud may not have charged due to problems with the charging case, or it was misplaced in the charging case.
• Pairing problems between the earbuds or connection problems between the earbuds and the device.

Jlab Jbuds Air Executive won’t turn on

If the Jlab Jbuds Air Executive won’t turn on, it may be due to the following:

• The earbuds do not have enough battery or were placed incorrectly in the charging case.
• The earbuds have a factory problem, so they may not turn on due to internal problems.

Why are my Jlab Jbuds Air Executive earbuds not charging?

• The charging case does not have enough battery to charge them.
• The charging cable of the case is bent or broken.
• The charging case has a factory problem, so it doesn’t charge the earbuds due to internal problems.
• The earbuds have a factory problem, so they may not turn on due to internal problems.

Why are my Jlab Jbuds Air Executive earbuds won’t pair together?

In case the earbuds won’t pair together, it is best to reset them and try again.

FAQ

Are Jlab Jbuds Air Executive waterproof?

The Jlab Jbuds Air Executive are IPX5 certified, so while they cannot be submerged underwater, they can be used in the rain or when exercising, and they are also dust-resistance.

Jlab Jbuds Air Executive Manual – Warnings

1. Never dismantle or refit the product to avoid malfunction or fire hazards.
2. Keep away from corrosive liquids to avoid damages to the product.
3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
4. Keep away from children and pets.
5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Jlab Jbuds Air Executive Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.