Home Audiophile Earbuds Manuals The JLab Jbuds Air Executive V2 earbuds come with Bluetooth 5.0, a battery life of about 6.5 hours + 24 hours with the charging case, an 8mm dynamic driver, the IPX5 dust and sweat-proof certification, and more. Learn how to use these earbuds using this manual! What's Inside 1JLab Jbuds Air Executive V2 | Everything You Need To KnowHow to Pair The Earbuds?How to Wear?How to Turn On and Off?How to Control? / How to Operate? – InstructionsHow to Custom The EQ Modes?How to Activate The Mono Mode?How to Charge The Earbuds?What Do The Lights Mean?The Earbud’s Voice PromptsHow to Reset The Earbuds?Some Common Earbuds Problems & TroubleshootingFAQs JLab Jbuds Air Executive V2 | Everything You Need To Know How to Pair The Earbuds? To iOS and Android Phones Step 1: Open the lid, take the earbuds out, and press and hold the multifunction touch sensor on both earbuds for about 3 seconds. After that, the “Hello” voice prompt will sound, and the earbuds will turn on. When a white light is on in one of the earbuds, a blue and white light is flashing on the other one, and the “Ready to pair” voice prompt sounds, the earbuds will be ready to pair with any device. Step 2: Turn on Bluetooth on the desired device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select the “JLab JBuds Air Executive”. If a password is needed, type “0000”. After that, the “Bluetooth connected” voice prompt will sound, a white light will stay on the earbuds, and the pairing will be done. To PC (Windows) Step 1: Turn on Bluetooth on the desired device. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid, take the earbuds out, and press and hold the multifunction touch sensor on both earbuds for about 3 seconds. After that, the “Hello” voice prompt will sound, and the earbuds will turn on. When a white light is on in one of the earbuds, a blue and white light is flashing on the other one, and the “Ready to pair” voice prompt sounds, the earbuds will be ready to pair with any device. Step 6: Select the “JLab JBuds Air Executive”. If a password is needed, type “0000”. After that, the “Bluetooth connected” voice prompt will sound, a white light will stay on the earbuds, and the pairing will be done. Credits: JLab How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. How to Turn On and Off? Turn on: Open the lid of the charging case, take the earbuds out, and press and hold the multifunction touch sensor on both earbuds for about 3 seconds. After that, the “Hello” voice prompt will sound, and the earbuds will turn on. Turn off: place the earbuds into the charging case. After that, the “Goodbye” voice prompt will sound, and the earbuds will turn off automatically. How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on the right earbud two times. Play the next song: Press and hold the multifunction touch button on the right earbud for about 1 second. Turn the volume up: Press the multifunction touch button on the right earbud one time. Turn the volume down: Press the multifunction touch button on the left earbud one time. Answer an incoming call: Press the multifunction touch button on the right earbud one time. End a current call: Press the multifunction touch button on the right earbud two times. Reject an incoming call: Press and hold the multifunction touch button on the right earbud for about 1 second. Change between music and movie mode: Press and hold the multifunction touch button on the right earbud for about 1 second. Activate the Be Aware mode: Press the multifunction touch button on the right earbud three times. Activate the voice assistant: Press the multifunction touch button on the left earbud two times. Credits: JLab How to Custom The EQ Modes? To custom the three EQ modes in these earbuds (JLab Signature, Balanced, and Bass Boost), all you have to do is to press the multifunction touch sensor on the left earbud three times. Credits: JLab How to Activate The Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. How to Charge The Earbuds? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Credits: JLab What Do The Lights Mean? Earbuds A white light is on in one of the earbuds, and a blue and white light is flashing on the other one: The earbuds are now ready to pair with any device. A white light on the earbuds: They are now connected to the device. Charging case A blue light flashing with the earbuds inside: The earbuds are charging. Said blue light turns off the earbuds inside: The earbuds are fully charged. A white light flashing: The case is charging. A white light on: The case is fully charged. The Earbud’s Voice Prompts Hello”: The earbuds turn on. “Ready to Pair”: The earbuds are ready to pair with any device. “Bluetooth Connected”: The earbuds are now connected to the device. “Battery Full”: The earbuds have between 100% and 80% of battery. “Battery Medium”: The earbuds have between 80% and 20% of battery. “Low Battery”: The earbuds have less than 20% of battery (when the battery goes to 10%, it will sound one time). “Goodbye”: The earbuds turn off. Credits: JLab How to Reset The Earbuds? Step 1: Delete all “JLab JBuds Air Executive” pairing information from the connected device. Step 2: Place the earbuds into the charging case and keep the lid open. Step 3: Press the multifunction touch sensor in one of the earbuds seven times. A blue light will flash three times. Step 4: Press the multifunction touch sensor on the other earbud seven times. A blue light will flash three times. Step 5: Take the earbuds out of the charging case. After that, the resetting will be done. Credits: JLab Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds has stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds.See alsoAukey EP-T28 Earbuds Manual | How To Pair These Earbuds? Gines·May 28, 2023 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth. 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are the JLab Jbuds Air Executive V2 waterproof? No, the JLab Jbuds Air Pro earbuds are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re splash and sweat-resistant. Do the JLab Jbuds Air Executive V2 have a microphone? Yes, the earbuds come with integrated microphones. Do the JLab Jbuds Air Executive V2 have a low latency/gaming mode? No, these earbuds don’t have a low latency/gaming mode. Can the JLab Jbuds Air Executive V2 connect to PCs and laptops? Yes, these earbuds can connect to PCs, laptops, and even tablets. Are the JLab Jbuds Air Executive V2 noise-canceling? No. These earbuds don’t come with noise-cancellation technology. How to know when the JLab Jbuds Air Executive V2 are fully charged? When the earbuds are charging, a blue light flashes on the case. When fully charged, said light turns off. We hope you now know how to operate the earphone from the above JLab Jbuds Air Executive V2 manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you have other JLab earbuds or are interested in learning about other models, the company has a page specially created to contain user manuals for some of its earbuds, headphones, and more.
