Jlab Jbuds Air Manual | Step-by-step Guide

True wireless earbuds are becoming more and more popular, and because of that, more and more are being released on the market. Among so many are the Jlab Jbuds Air, an eye-catching release made by the popular brand Jlab. Today we are going to talk about them, as well as how to use them in this new Jlab Jbuds Air Manual!

Jlab Jbuds Air Manual | All You Need To Know!

Jlab Jbuds Air Manual – Pairing / How to Pair?

Step 1: Take both earbuds out of the charging case.

Step 2: Press and hold the touch sensors on both earbuds for 3 seconds to turn them on. After that, the LED lights on the left earbud will turn solid white, and the LED light on the right earbud will blink blue and white, indicating ready to pair to your device.

Step 3: Turn on the Bluetooth in the device you want to connect them.

Step 4: Refresh the Bluetooth page and select “Jlab Jbuds Air ANC” in your device’s Bluetooth settings to connect. The voice prompt “Bluetooth connected” will sound followed by solid white lights, which will indicate they are connected.

Jlab Jbuds Air Manual – What’s the battery life of the Jlab Jbuds Air?

The Jlab Jbuds Air has a battery life of about 6 hours.

Jlab Jbuds Air Manual – Charging / How to Charge?

Charging the earbuds

Step 1: Match the corresponding L and R letters on the charging case for proper charging. They will automatically start charging and the case LED lights will show that the earbuds are charging.

Step 2: When a blue LED light turns on; the earbuds will begin the charging process. When the blue LED lights turn off, the earbuds will be fully charged.

Step 3: After that, the earbuds will automatically power on and connect to the device when removed.

Charging the charging case

To charge the charging case, all you have to do is to connect the case to a computer or USB 5V 1A (or less) output device. The LED lights on it will blink white when charging, and turn solid white when fully charged.

Jlab Jbuds Air Manual – Control Guide / How to Use?

• Manually power on the earbuds: Press and hold the touch sensor on any of the earbuds for 3 seconds.
• Turn the volume up: Single tap the touch sensor on the right earbud.
• Turn the volume down: Single tap the touch sensor on the left earbud.
• Play of pause music: Double tap the touch sensor on the right earbud.
• Play next song: Press and hold the touch sensor on the right earbud for 1 second.
• Play previous song: Press and hold the touch sensor on the left earbud for 1 second.
• Answer an incoming call: Single tap the touch sensor on the right earbud.
• Hang-up a phone call: Double tap the touch sensor on the right earbud.
• Reject an incoming call: Press and hold the touch sensor on the right earbud for 1 second.
• Custom EQ modes: Triple tap the touch sensor on any of the earbuds.
• Activate Siri (iOS) or Ok Google (Android): Double tap the touch sensor on the left earbud.
• Music / movie mode: Press and hold the touch sensors on both earbuds for 3 seconds.

Jlab Jbuds Air Manual – What it means?

LED status on the earbuds

• LED lights blinking blue and white: Earbuds ready to connect.
• LED lights solid white: Connection successful.

LED status on the charging case

• LED lights blue: Earbuds charging.
• LED lights blinking white: Case charging.
• LED lights solid white: Fully charged.

Jlab Jbuds Air Manual – How to factory reset the Jlab Jbuds Air?

Step 1: Enter your Bluetooth device settings and forget the “Jlab Jbuds Air” device, and turn off Bluetooth.

Step 2: Open the charging case lid and leave both earbuds inside.

Step 3: Starting with ONE earbud, quickly press the multifunction button 7 times. A light will blink blue three times to then turn off. Keep the earbuds in the charging case.

Step 4: Repeat with the other earbud. Quickly press the button 4 times. A light will blink blue three times to then turn off.

Step 5: Close the charging case.

Step 6: Wait 10 seconds and open the charging case. Wait for the LEF light on both earbuds to blink blue and white.

Step 7: You are now ready to pair to your Bluetooth device.

Jlab Jbuds Air Manual – How to turn on and off?

Turn on the earbuds

• Using the charging case: Take the earbuds out of the charging case.
• Using the earbuds themselves: Press and hold the touch sensors on both earbuds for 3seconds.

Turn off the earbuds

• Using the charging case: Place the earbuds into the charging case.
• Without the charging case: Enter your Bluetooth device settings and disconnect the Jlab Jbuds Air. After that, the earbuds will power off automatically after 3 minutes.

Troubleshooting

What to do when Jlab Jbuds Air keeps falling out?

If that happens, then try using an ear tip with a better fitting for your ear. Foam ear tips can be a perfect fit and prevent the Jlab Jbuds Air from falling out of ears.

Jlab Jbuds Air keeps disconnecting

The Jlab Jbuds Air can be disconnected due to certain factors, such as:

• Use them outside the valid range (around 10 meters).
• The Bluetooth module in the device that the earbuds are connected to is very old.
• In case of being connected to a computer, there is a problem in the connection settings in the version of Windows used.
• In case of being connected to a smartphone, there is a problem in the connection configuration in the OS version used.

Jlab Jbuds Air keeps cutting sound

In case in the Jlab Jbuds Air the sound keeps cutting, it can happen due to certain factors, such as:

• Pairing problems between the earbuds or connection problems between the earbuds and the device.
• The audio file is not supported or cannot be played in sound.
• The Bluetooth module in the device that the earbuds are connected to is very old.

If this happens, it is highly recommended to reset the earbuds.

Jlab Jbuds Air left or right earbud not working

If you realize that one of the earbuds is not working, you should make sure of the following:

• Make sure the earbuds are not in Mono Mode, because when this is on, only one of the earbuds will work.
• The non-working earbud may not have charged due to problems with the charging case, or it was misplaced in the charging case.
• Pairing problems between the earbuds or connection problems between the earbuds and the device.

FAQ

Are the Jlab Jbuds Air waterproof?

The Jlab Go Air is IPX4 certified, so while they cannot be submerged underwater, they can be used in the rain or when exercising.

Are the Jlab Jbuds Air compatible with iPhone?

The Jlab Jbuds Air is a pair of earbuds that are compatible with many products, including Android phones and iPhones.

Are the Jlab Jbuds Air noise cancelling?

Yes, the Jlab Jbuds Air supports the Active Noice Cancelling feature.

How much are the Jlab Jbuds Air?

The price of the Jlab Jbuds Air is around $50.

Do the Jlab Jbuds Air have a microphone?

Yes, the Jlab Jbuds Air has a built-in microphone.

Jlab Jbuds Air Manual – Warnings

1. Never dismantle or refit the product to avoid malfunction or fire hazards.
2. Keep away from corrosive liquids to avoid damages to the product.
3. Keep away from extreme ambient temperatures below -10C° or above 60°C.
4. Keep away from children and pets.
5. Never touch the earbuds with sharp objects, otherwise, it will easily cause scratches.
6. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
7. If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.

We hope you now know how to operate the earphone from the above Jlab Jbuds Air Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.