Home Audiophile Earbuds Manuals The JVC Gumy Mini comes with the IPX4 dust and sweat-proof certification, Bluetooth 5.1, a battery life of 6 hours + 9 hours using the charging case, a working range of 10 meters, and more. Learn how to use them with this new JVC Gumy Mini Manual. What's Inside 1JVC Gumy Mini Manual | All You Need To Know!JVC Gumy Mini Manual | How to Pair / Connect?JVC Gumy Mini Manual | How to Wear?JVC Gumy Mini Manual | How to Turn On and Off?How to Control? / How to Operate? – InstructionsJVC Gumy Mini Manual | How to Activate Mono Mode?JVC Gumy Mini Manual | How to Reset?JVC Gumy Mini Manual | How to Charge?JVC Gumy Mini Manual | LED Light StatusSome Common Earbuds Problems & TroubleshootingFAQs JVC Gumy Mini Manual | All You Need To Know! JVC Gumy Mini Manual | How to Pair / Connect? To iOS and Android phones Step 1: Open the lid of the charging case and take the earbuds out. After that, a light will start flashing the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds. When a light starts flashing on the right earbud every 5 seconds, and a “Pairing” voice prompt sounds on the earbuds, that means that they will be ready to pair with any device. Step 2: Turn on Bluetooth on the desired device. Step 3: Go to the device’s Bluetooth settings. Step 4: Select “JVC HA-A5T”. If a password is needed, type “0000”. While this is happening, a light will flash slowly on the earbuds. Step 5: After that, a light will start flashing on both earbuds every 5 seconds, and the pairing will be done. To PC (Windows) Step 1: Turn on Bluetooth on the desired device. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case and take the earbuds out. After that, a light will start flashing the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds. When a light starts flashing on the right earbud every 5 seconds, and a “Pairing” voice prompt sounds on the earbuds, that means that they will be ready to pair with any device. Step 6: Select “JVC HA-A5T”. If a password is needed, type “0000”. While this is happening, a light will flash slowly on the earbuds. Step 7: After that, a light will start flashing on both earbuds every 5 seconds, and the pairing will be done. Credits: manual3.jvckenwood.com JVC Gumy Mini Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. JVC Gumy Mini Manual | How to Turn On and Off? Turn on: Open the lid of the charging case and take the earbuds out. After that, a light will start flashing the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds. Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 3 seconds. Credits: manual3.jvckenwood.com How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on any of the earbuds one time.Play the next song: Press the multifunction touch button on the right earbud two times.Play the previous song: Press the multifunction touch button on the right earbud three times.Turn the volume down: Press the multifunction touch button on the left earbud two times.Turn the volume up: Press the multifunction touch button on the left earbud three times.Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.End a current call: Press the multifunction touch button on any of the earbuds one time.Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second, until a “beep” is heard.Switching between the earbuds and the smartphone during a call: Press and hold the multifunction touch button on any of the earbuds for about 1 second, until a “beep” is heard.Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 1 second, until a “beep” is heard. JVC Gumy Mini Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. Credits: manual3.jvckenwood.com JVC Gumy Mini Manual | How to Reset? Step 1: Delete all “JVC HA-A5T” pairing information from the connected device. Step 2: Place the earbuds into the charging case and keep the lid open. Step 3: Press and hold the multifunction touch button on the left earbud for about 10 seconds, and a light will flash on the earbuds once. Step 4: Continue to press the said button for another 5 seconds, until the indicator flashes once again, and then release. Step 5: Press and hold the multifunction touch button on the right earbud for about 10 seconds, and a light will flash on the earbuds once. Step 6: Continue to press the said button for another 5 seconds, until the indicator flashes once again, and then release. Step 7: Take the earbuds out of the charging case. Step 8: Place them into the charging case again. After that, the resetting will be done. JVC Gumy Mini Manual | How to Charge? Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, the case can be charged using a wireless charger. Credits: manual3.jvckenwood.com JVC Gumy Mini Manual | LED Light Status Earbuds A light starts flashing on the right earbud every 5 seconds: The earbuds will be ready to pair with any device.A light starts flashing slowly on the earbuds: The earbuds are pairing.A light starts flashing on both earbuds every 5 seconds: The pairing was successful.A light is on while charging: The earbuds are charging.Said light turns off while charging: The earbuds are fully charged. Charging case A light is on while charging: The case is charging.Said light turns off while charging: The case is fully charged. Credits: manual3.jvckenwood.com Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case.See alsoAnker Soundcore Sleep A10 | Step-by-step User Manual Gines·May 27, 2023 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. The microphone is not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. The earbuds are not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: BGR FAQs Are the JVC Gumy Mini waterproof? No, the JVC Gumy Mini are not waterproof (IPX6 and up). They have a rating of IPX4, which means they’re splash and sweat-resistant. Do the JVC Gumy Mini have a microphone? Yes, the earbuds come with integrated microphones. Do the JVC Gumy Mini have a low latency/gaming mode? No, these earbuds don’t have a low latency/gaming mode. How to know when the JVC Gumy Mini are fully charged? When the earbuds are charging, a light turns on the charging case. When fully charged, said light turns off. Can the JVC Gumy Mini connect to PC and Laptop? Yes, these earbuds can connect to PCs, laptops, and even tablets. Are the JVC Gumy Mini noise canceling? No! These earbuds don’t come with noise cancellation technology. We hope you now know how to operate the earphone from the above JVC Gumy Mini Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.