Kitone Freego X01 Manual | Guide & Troubleshooting

The Kitone Freego X01 earbuds come with specs such as the IPX6 waterproof certification, Bluetooth 5.0 technology, around 5 hours of playtime + 20 more hours using the charging case, one 10mm driver on each earbud, support for the SBC audio codec, and much more. Learn how to use these earbuds using this Kitone Freego X01 manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Kitone Freego X01 Specs Sheet

Model	Kitone Freego X01
Waterproof/IP ratings	IPX6
Bluetooth version	V5.0
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC
Driver	10mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 5 hours Charging case: Around 20 hours
Charging Time	Earbuds: Around 1.5 hours Charging case: Around 2 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, turn the volume up and down, voice assistant
Accessories	Charging case, USB cable, user manual, ear tips
Price	Around 20 USD

Kitone Freego X01 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.

Kitone Freego X01 Manual | All You Need To Know

How To Reset The Earbuds?

Step 1: Delete all pairing information about the KITONE Freego X01 earbuds on the connected device.

Step 2: With the earbuds out of the case, press the touch control area on both earbuds three times.

This will reset the earbuds, and they will be ready to re-pair.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Rotate the earbuds along the ear curve for the best possible comfort.

Step 4: Check the fit.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, a blue light will be on for 1 second, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Manually: Press and hold the touch control area on both earbuds for about 3 seconds. After that, a blue light will be on for 1 second, the “Power on” voice prompt will sound, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, a red light will be on for 1 second, the “Power off” voice prompt will sound, and the earbuds will turn off automatically.

Manually: Press and hold the touch control area on both earbuds for about 5 seconds. After that, a red light will be on for 1 second, the “Power off” voice prompt will sound, and the earbuds will turn off.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a blue light will be on for 1 second, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing on the earbuds, meaning that they will now be ready to pair.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the KITONE Freego X01 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Pairing succeed” and “Your headset is connected” voice prompts will sound, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, a blue light will be on for 1 second, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

A red and blue light will start flashing on the earbuds, meaning that they will now be ready to pair.

Step 7: Select the KITONE Freego X01 earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Pairing succeed” and “Your headset is connected” voice prompts will sound, and the pairing will be done.

How To Control These Earbuds?

NOTE: The touch control area is placed on the middle part of the body of the earbuds.

• Play and pause a song: Press the touch control area on any of the earbuds one time.
• Play the next song: Press the touch control area on the right earbud two times.
• Play the previous song: Press the touch control area on the left earbud two times.
• Turn the volume up: Press and hold the touch control area on the right earbud.
• Turn the volume down: Press and hold the touch control area on the left earbud.
• Answer an incoming call: Press the touch control area on any of the earbuds one time.
• End a current call: Press the touch control area on any of the earbuds one time.
• Reject an incoming call: Press and hold the touch control area on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the touch control area on any of the earbuds three times.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A blue light on for 1 second: The earbuds turn on.
• A red light on for 1 second: The earbuds turn off.
• A red and blue light flashes: The earbuds are ready to pair.
• A red light on while on the changing case: The earbuds are charging.
• A blue light on for 5 seconds while on the changing case: The earbuds are fully charged.

The Earbuds’ Voice Prompts

• Turn on.
• Turn off.
• Pairing succeed.
• Your headset is connected.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Kitone Freego X01 manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.