Kogan T3 Pro Manual | Step-by-step User Guide

The Kogan T3 Pro come with specs such as the IPX6 waterproof certification, 9mm drivers in each earbud, an amazing battery life of about 18 hours + 24 hours using the charging case, Bluetooth 5.0 with CVC dual mic noise cancelling technology support, the Qualcomm QCC3020 chipset, and much more. Learn how to use these earbuds using this manual!

Kogan T3 Pro | Everything You Need To Know

How to Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a tone is heard on the earbuds, it means that they are now connected to each other.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “T3 Pro” earbuds. If a password is needed, type “0000”. After that, a prompt tone will sound, and the pairing will be done.

To PC (Windows)

Step 1: Unlock the desired device.

Step 2: Turn on Bluetooth on the device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Click on “Add device”.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a tone is heard on the earbuds, it means that they are now connected to each other.

Step 7: Select the “T3 Pro” earbuds. If a password is needed, type “0000”. After that, a prompt tone will sound, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 3 seconds.
• Activate the voice assistant: Press the multifunction touch button on the left earbud three times.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, it can get charged using a wireless charger.

The Earbuds’ Voice Prompts

• Battery low: The battery level on the earbuds is lower than 3%.

How to Reset The Earbuds?

Step 1: Place both earbuds into the charging case.

Step 2: Press and hold the multifunction touch button on both earbuds for about 7 seconds, until a blue light flashes three times and turns off.

Step 3: Take both earbuds out of the charging case. A blue light will start flashing and the earbuds will automatically attempt to pair with each other.

Step 4: Delete all pairing records of the “T3 Pro” earbuds from the connected device.

After that, the process will be done.

What Do The Lights Mean?

Earbuds

• A blue light flashing while on the charging case: The earbuds are charging.
• Said light turns off while on the charging case: The earbuds are fully charged.
• A blue light flashes three times and turns off: The earbuds are resetting.

Charging case

• Some blue lights start flashing while charging: The case is charging.
• All lights are on while charging: The case is charging.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Kogan T3 Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.