Kurdene S8 Manual | Pairing & Charging Instructions

On this page we have already spoken several times about a large number of wired headphones and wireless headphones, thus showing all the incredible features that they bring inside. This time we are going to talk about the user manual that comes with one of these, and it is the instruction manual that comes with the Kurdene S8, and in this new article, we are going to show you everything that comes in this one, as well as the correct way to use them in this Kurdene S8 Manual.

If you are interested in purchasing these earbuds, you can easily do it using the Kurdene official website. Also, if you want to give the original manual a look, you can do it here.

Kurdene S8 Specs Sheet

Model	Kurdene S8
Weight	Earbuds: 4.7 grams each
Waterproof/IP ratings	IPX8
Bluetooth version	V5.0
Range/Distance	10 meters
Driver	6mm
Audio Decoding	SBC, AAC
Connectivity Port/Charging Cable	Type-C
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: About 6 hours Charging case: About 24 hours
Charging Time	Earbuds: About 1.5 hours Charging time: About 2 hours
App Support	No
Controls/Features	Play or pause music, play the next and previous song, turn the volume up and down, answer, end, or reject a call, voice assistant
Accessories	Charging case, user manual, USB cable, ear tips
Price	About 30 USD

Kurdene S8 Accessories

The earbuds come with the following accessories:

• Charging case.
• User manual.
• USB cable.
• Ear tips.

Kurdene S8 Manual | Guide & Troubleshooting

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Manually: Press and hold the multifunction touch button on both earbuds for about 3 seconds. After that, the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A red and blue light will start flashing alternately, and this will mean that the earbuds are pairing with each other.

When a red and blue light flashes only in one of the earbuds, the earbuds will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the S8 earbuds. If a password is needed, type “0000” or “1234”.

After that, a blue light will flash every 6 seconds, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A red and blue light will start flashing alternately, and this will mean that the earbuds are pairing with each other.

When a red and blue light flashes only in one of the earbuds, the earbuds will now be ready to pair with any device.

Step 7: Select the S8 earbuds. If a password is needed, type “0000” or “1234”.

After that, a blue light will flash every 6 seconds, and the pairing will be done.

How To Control These Earbuds? – Stereo Mode

NOTE: The multifunction touch button is placed on the top part of the body of the earbuds.

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Turn the volume up: Press and hold the multifunction touch button on the right earbud for about 1 second.
• Turn the volume down: Press and hold the multifunction touch button on the left earbud for about 1 second.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Reset And Re-Pair These Earbuds?

To ensure a good result, make sure that the earbuds are fully charged.

Step 1: Go to the device’s settings.

Step 2: Delete the S8 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the device.

Step 4: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A red and blue light will start flashing alternately, and this will mean that the earbuds are pairing with each other.

Step 5: Press the multifunction touch button on both earbuds four times. The earbuds will restart automatically after clearing the pairing records.

Step 6: Turn on Bluetooth on the desired device.

Step 7: Search for a new device.

Step 8: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically. A red and blue light will start flashing alternately, and this will mean that the earbuds are pairing with each other.

When a red and blue light flashes only in one of the earbuds, the earbuds will now be ready to pair with any device.

Step 9: Select the S8 earbuds. If a password is needed, type “0000” or “1234”.

After that, a blue light will flash every 6 seconds, and the pairing will be done.

What Do The Lights Mean?

Earbuds

• A red and blue light flashing alternately: The earbuds are pairing with each other.
• A red and blue light flashing in one of the earbuds: The earbuds are now ready to pair with any device.
• A blue light will flash every 6 seconds: The pairing process is done.
• A red light flashing while on the charging case: The earbuds are charging.
• The red light turns off while on the charging case: The earbuds are fully charged.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Kurdene S8 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.