Lanteso-Earbuds-Manual-6

Lanteso Earbuds Manual | Step-by-step Guide 2022

Aliexpress banner

The Lanteso Earbuds comes with 4 hours of battery life + 24 hours with the charging case, Bluetooth 5.0, the IPX5 water-resistance certification, a Bluetooth range of 33 feet, amazing touch controls, and much more. Learn how to use them with this new Lanteso Earbuds Manual.

Lanteso Earbuds Manual | Everything You Need To Know!

Lanteso Earbuds Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically and a blue light will flash on both earbuds. Also, a red and blue light will start flashing on both earbuds, meaning that they are paired with each other.

When a red and blue light starts flashing on the left earbud, they will be ready to pair to any device.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “DBK01”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically and a blue light will flash on both earbuds. Also, a red and blue light will start flashing on both earbuds, meaning that they are paired with each other.

When a red and blue light starts flashing on the left earbud, they will be ready to pair to any device.

Step 7: Select “DBK01”. If a password is needed, type “0000”.

Step 8: After that, the pairing will be done.

Lanteso-Earbuds-Manual-1

Lanteso Earbuds Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Lanteso Earbuds Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically and a blue light will flash on both earbuds. Also, you can press and hold the multifunction touch button on both earbuds for 3 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

Lanteso-Earbuds-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on the right earbud one time.
  • Turn the volume up: Press and hold the multifunction touch button on the right earbud.
  • Turn the volume down: Press and hold the multifunction touch button on the left earbud.
  • Play the next song: Press the multifunction touch button on the right earbud two times.
  • Play the previous song: Press the multifunction touch button on the left earbud two times.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for two seconds.
  • Activate the voice assistant: Press the multifunction touch button on any of the earbuds three times.
Lanteso-Earbuds-Manual-3

Lanteso Earbuds Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Lanteso earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Lanteso Earbuds Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Lanteso-Earbuds-Manual-4

Lanteso Earbuds Manual | LED Light Status

Earbuds

  • A blue light flashing on both earbuds: Earbuds turn on.
  • A blue light flashing on both earbuds turns off: Earbuds turn off.
  • A red and blue light starts flashing on both earbuds: Earbuds are paired to each other.
  • A red and blue light starts flashing on the left earbud: Earbuds are ready to pair to any device.
  • A red light on: Earbuds charging.
  • A red light turns on: Earbuds fully charged.
  • A red light flashing every 6 seconds: Earbuds have a low battery.
  • A red and blue light on for 2 seconds: Earbuds resetting.

Charging case

  • A red light on: Case charging.
  • A red light turns on: Case is fully charged.
  • A blue light flashing: Case has a low battery.
  • A blue light on: Earbuds charging.

Lanteso Earbuds Manual | How to Reset?

Step 1: Enter your device’s Bluetooth settings and forget the Lanteso earbuds.

Step 2: Press the multifunction touch button on both earbuds four times.

Step 3: After that, a red and blue light will be on for 2 seconds, and the resetting will be done.

Lanteso-Earbuds-Manual-5

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Lanteso earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Lanteso-Earbuds-Manual-6

FAQs

Are Lanteso earbuds waterproof?

The Lanteso Earbuds have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle.

Does Lanteso earbuds have a microphone?

Yes, the Lanteso earbuds have integrated microphones.

Do Lanteso earbuds have low latency/gaming mode?

No, the Lanteso earbuds don’t have low latency/gaming mode.

How to know when Lanteso earbuds are fully charged?

The earbuds take about 1.5 hours to charge, so after that time, they should be fully charged.

Can Lanteso earbuds connect to PC and Laptop?

Yes, the Lanteso earbuds can connect to PCs, laptops, and tablets.

We hope you now know how to operate the earphone from the above Lanteso earbuds Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.