Lenovo-ThinkPlus-LP40-Manual-5

Lenovo LP40 Manual | Step-by-step Guide

Aliexpress banner

The Lenovo LP40 have Bluetooth 5.0, a 13mm driver, a 10 meters Bluetooth working range, a battery life of about 4 hours + 22 hours using the charging case, the IPX5 certification, and more. Learn how to use them with this new Lenovo LP40 Manual.

Lenovo LP40 Manual | Pairing & Charging Instructions

Lenovo LP40 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a white light starts flashing in one of the earbuds, they will be ready to pair with any device.

Step 2: Turn on the Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select “Lenovo LP40”. If a password is needed, type “0000”.

Step 5: After that, the flashing light will turn off, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

When a white light starts flashing in one of the earbuds, they will be ready to pair with any device.

Step 7: Select “Lenovo LP40”. If a password is needed, type “0000”.

Step 8: After that, the flashing light will turn off, and the pairing will be done.

Lenovo-ThinkPlus-LP40-Manual-1

Lenovo LP40 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Lenovo LP40 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 6 seconds.

Lenovo-ThinkPlus-LP40-Manual-2

How to Control? / How to Operate? – Instructions

  • Play or pause music: Press the multifunction touch button on any of the earbuds two times.
  • Play the next song: Press the multifunction touch button on the right earbud three times.
  • Play the previous song: Press the multifunction touch button on the left earbud three times.
  • Turn the volume up: Press the multifunction touch button on the left earbud one time.
  • Turn the volume down: Press the multifunction touch button on the right earbud one time.
  • Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
  • End a current call: Press the multifunction touch button on any of the earbuds two times.
  • Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
  • Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

Lenovo LP40 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Lenovo LP40, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Lenovo-ThinkPlus-LP40-Manual-3

Lenovo LP40 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Lenovo LP40 Manual | How to Reset?

Step 1: Delete all “Lenovo LP40” pairing records from the connected device.

Step 2: Open the lid of the charging case and take the earbuds out. After that, the earbuds will turn on automatically.

Step 3: Press the multifunction touch button on both earbuds 5 times.

Step 4: Press and hold the multifunction touch button on both earbuds for about 6 seconds so they turn off.

Step 5: Place the earbuds into the charging case. After that, the resetting will be done.

Lenovo-ThinkPlus-LP40-Manual-4

Lenovo LP40 Manual | LED Light Status

Earbuds

  • A white light flashing in one of the earbuds: The earbuds are ready to pair.
  • Said white light turns off: The earbuds are connected to the device.
  • A white light on while on the charging case: The earbuds are charging.
  • Said white light turns off: The earbuds are fully charged.
  • A white light flashing every 2 minutes: The earbuds have a low battery.

Charging case

  • A red light flashing while charging: The case is charging.
  • A red light on while charging: The case is fully charged.
  • A green light flashing with the earbuds inside: The earbuds have a low battery.
  • A green light on with the earbuds inside: The earbuds are charging.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds as said in the pairing section above.

Lenovo-ThinkPlus-LP40-Manual-5

FAQs

Are the Lenovo LP40 waterproof?

No, the Lenovo LP40 are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Do the Lenovo LP40 have a microphone?

Yes, the earbuds come with integrated microphones.

Do the Lenovo LP40 have a low latency/gaming mode?

No, these earbuds don’t have a low latency/gaming mode.

Can the Lenovo LP40 connect to PC and Laptop?

Yes, these earbuds can connect to PCs, laptops, and even tablets.

Are the Lenovo LP40 noise-canceling?

No! These earbuds don’t come with noise cancellation technology.

How to know when the Lenovo LP40 are fully charged?

When the earbuds are charging, a white light is on. When fully charged, the light turns off.

We hope you now know how to operate the earphone from the above Lenovo LP40 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.