Lypertek-Tevi-Manual-8

Lypertek Tevi Manual | Instructions & Troubleshooting 2021

The Lypertek Tevi comes with an IPX7 certification, Bluetooth 5.2, a battery life of 9 hours, a 6mm driver size, and much more. Learn how to use them with this new Lypertek Tevi Manual.

Lypertek Tevi Manual | Everything You Need To Know!

Lypertek Tevi Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Take the earbuds out of the charging case. They will automatically turn on and pair to each other.

Step 2: Press the multifunction button on any of the earbuds to enter pairing mode.

Step 3: Go to the Bluetooth settings.

Step 4: Select “Select “TEVI-L” and “TEVI-R”. If a password is needed, type “0000”.

Step 5: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Take the earbuds out of the charging case. They will automatically turn on and pair to each other.

Step 7: Press the multifunction button on any of the earbuds to enter pairing mode.

Step 8: Select “TEVI-L” and “TEVI-R”. If a password is needed, type “0000”.

Step 9: After that, the pairing will be done.

Lypertek-Tevi-Manual-1

Lypertek Tevi Manual | How to Turn On And Off?

Turn on

Automatically: Take the earbuds out of the charging case. They will automatically turn on.

Manually: Press and hold the multifunction button on the earbuds for 3 seconds.

Lypertek-Tevi-Manual-2

Turn off

Automatically: Place the earbuds into the charging case. They will automatically turn off.

Manually: Press and hold the multifunction button on the earbuds.

Lypertek-Tevi-Manual-3

Lypertek Tevi Manual | How to Activate Mono Mode?

To activate the mono mode on the Lypertek Tevi, all you have to do is to place one of the earbuds into the charging case, and the other one will keep working.

How to Control? / How to Operate? – Instructions

  • Play and pause music: Press the multifunction button any of the earbuds once.
  • Turn the volume up: Press the multifunction button on the right earbud twice.
  • Turn the volume down: Press the multifunction button on the left earbud twice.
  • Play the next song: Press the multifunction button on the right earbud three times
  • Play the previous song: Press the multifunction button on the left earbud three times
  • Answer an incoming call: Press the multifunction button any of the earbuds once.
  • End a call: Press the multifunction button any of the earbuds once.
  • Reject an incoming call: Press and hold the multifunction button on any of the earbuds for 1 second.
  • Activate the Voice Assistant: Press and hold the multifunction button on any of the earbuds for 1 second.
Lypertek-Tevi-Manual-4

Lypertek Tevi Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

Lypertek-Tevi-Manual-5

Lypertek Tevi Manual | LED Light Status

Charging case

  • One light on: 0 – 25% of battery.
  • Two lights on: 25 – 50% of battery.
  • Three lights on: 50 – 75% of battery.
  • All lights on: 75 – 100% of battery.
Lypertek-Tevi-Manual-6

Lypertek Tevi Manual | How to Reset?

Step 1: Forget the “TEVI-L” and “TEVI-R” from the Bluetooth list on the device.

Step 2: Place both earphones into the charging case.

Step 3: Press and hold the multifunction button on both earbuds for 5 seconds. A light will start flashing.

Step 4: After that, release the fingers and the resetting will be done.

Step 5: Follow the pairing process to connect the earbuds with the device again.

A Guide To Lypertek Tevi APP

The Lypertek Tevi can be used with an application, called PureControl. This application is available for iOS and Android devices.

In this application, not only will you be able to control the volume of the earbuds, but you will also be able to see the percentage of the battery. In addition to that, there are also the features to activate or deactivate LDX audio, change the configuration in the equalizer, modify the controls of the earbuds and others.

Lypertek-Tevi-Manual-7

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory reset the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Jabra Elite 65t earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

Lypertek-Tevi-Manual-8

FAQs

Are Lypertek Tevi waterproof?

The Lypertek Tevi have an IPX7 water-resistant rating, meaning that they not only are they against water, but they are also protected against the effects of immersion.

Does Lypertek Tevi have a microphone?

Yes, the Lypertek Tevi have an integrated microphone.

Do Lypertek Tevi have low latency/gaming mode?

No, the Lypertek Tevi don’t have low latency/gaming mode.

How to know when Lypertek Tevi are fully charged?

The Lypertek Tevi take about 1 hour to charge, so after that time, they should be fully charged.

Can Lypertek Tevi connect to PC and Laptop?

Yes, the Lypertek Tevi can connect to PCs, laptops and tablets.

We hope you now know how to operate the earphone from the above Lypertek Tevi Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Lypertek company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries! Also, they have a Support page, with FAQs and information about their products!