Home Audiophile Earbuds Manuals The Mifa X17 have a frequency range of 20HZ-20KHZ, 30 total hours of battery life, the IPX5 rated dust and water resistance for outdoor scenarios, HSP/HFP/A2DP/AVRCP technology, Bluetooth 5.0 with aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new Mifa X17 Manual. What's Inside 1Mifa X17 Manual | Everything You Need To Know!Mifa X17 Manual | How to Pair / Connect?Mifa X17 Manual | How to Wear?Mifa X17 Manual | How to Turn On and Off?How to Control? / How to Operate? – InstructionsMifa X17 Manual | How to Activate Mono Mode?Mifa X17 Manual | How to ChargeMifa X17 Manual | LED Light StatusMifa X17 Manual | How to Reset?Some Common Earbuds Problems & TroubleshootingFAQs Mifa X17 Manual | Everything You Need To Know! Mifa X17 Manual | How to Pair / Connect? To iOS and Android phones Step 1: Open the lid of the charging case. After that, a red light will flash for 1 second, and the earbuds will turn on automatically. When a blue light starts flashing, they will be ready to pair to any device. Step 2: Go to the device’s Bluetooth settings. Step 3: Select “Mifa X17”. If a password is needed, type “0000”. Step 4: After that, the blue light will turn off, and the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Click on Bluetooth. Step 6: Open the lid of the charging case. After that, a red light will flash for 1 second, and the earbuds will turn on automatically. When a blue light starts flashing, they will be ready to pair to any device. Step 7: Select “Mifa X17”. If a password is needed, type “0000”. Step 8: After that, the blue light will turn off, and the pairing will be done. Mifa X17 Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Mifa X17 Manual | How to Turn On and Off? Automatically Turn on: Open the lid of the charging case. After that, a red light will flash for 1 second, and the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case. After that, a red light will flash for 2 seconds, and the earbuds will turn off automatically. Manually Turn on: Press and hold the multifunction touch button on both earbuds for about 3 seconds. After that, a red light will flash for 1 second, and the earbuds will turn on. Turn off: Press and hold the multifunction touch button on both earbuds for about 5seconds. After that, a red light will flash for 2 seconds, and the earbuds will turn off. How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on any of the earbuds one time.Play the next song: Press the multifunction touch button on any of the earbuds two times.Play the previous song: Press the multifunction touch button on any of the earbuds three times.Answer an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.End a call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.Turn on/off mute mode while on a call: Press and hold the multifunction touch button on any of the earbuds for about 3 seconds.Activating the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. Mifa X17 Manual | How to Activate Mono Mode? To activate the mono mode in the Mifa X17, all you have to do is to take out the desired earbud from the charging case. It will start working by itself. Mifa X17 Manual | How to Charge Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Mifa X17 Manual | LED Light Status Earbuds Blue light flashing: Earbuds ready to pair.Blue light flashing turns off: Earbuds paired to device.Red light flashing for 1 second: Earbuds turn on.Red light flashing for 2 seconds: Earbuds turn off.Blue light flashes quickly three times, and then a red light turns on for 2 seconds: Earbuds resetting. Mifa X17 Manual | How to Reset? Step 1: Delete all “Mifa X17” from the Bluetooth menu on your phone and deactivate the Bluetooth setting. Step 2: Open the lid of the charging case. After that, a red light will flash for 1 second, and the earbuds will turn on automatically. Step 3: Press the multifunction touch button in both earbuds two times. Step 4: Press and hold the multifunction touch button in both earbuds for a couple of seconds, until a blue light flashes quickly three times, and then a red light turns on for 2 seconds. Step 5: After that, the resetting will be done. Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range.See alsoMonster Clarity 200 Airlinks | Everything You Need To KnowGines·March 28, 2023 If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it. Left / Right / One side of the earbuds has low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. Microphone not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. Mifa X17 earbuds not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. FAQs Are Mifa X17 waterproof? The Mifa X17 earbuds have the IPX5 certification, which means they’re dustproof and protected against water projected from a nozzle. Does Mifa X17 have a microphone? Yes, the Mifa X17 have integrated microphones. Do Mifa X17 have low latency/gaming mode? No, the Mifa X17 don’t have a low latency/gaming mode. How to know when Mifa X17 are fully charged? The earbuds take about 1.1 hours to charge, so after that time, they should be fully charged. Can Mifa X17 connect to PC and Laptop? Yes, the Mifa X17 can connect to PCs, laptops, and tablets. We hope you now know how to operate the earphone from the above Mifa X17 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section. In case you want or need to contact the Mifa company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!
