Mifa X180 Manual | Step-by-step, In-depth Guide 2022

The Mifa X180 have the IPX7 sweat and water certification, 4 microphones that allow HD calls, ENC Noise Cancelling technology for talking, a total battery life of 30 hours, around 5 hours of playtime, Bluetooth 5.0 with aptX, AAC, and SBC codecs, and much more. Learn how to use them with this new Mifa X180 Manual.

Mifa X180 Manual | Everything You Need To Know!

Mifa X180 Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 2: Go to the device’s Bluetooth settings.

Step 3: Select “Mifa X180”. If a password is needed, type “0000”.

Step 4: After that, the pairing will be done.

To PC (Windows)

Step 1: Turn on Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Step 6: Select “Mifa X180”. If a password is needed, type “0000”.

Step 7: After that, the pairing will be done.

Mifa X180 Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Mifa X180 Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Turn off: Put the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press the multifunction touch button on the right earbud three times.
• Play the previous song: Press the multifunction touch button on the left earbud three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a call: Press the multifunction touch button on any of the earbuds one time.
• Activate the voice assistant: Press the multifunction touch button on the right earbud two times.

Mifa X180 Manual | How to Activate Gaming Mode?

To activate or deactivate the Gaming mode in the Mifa X180, all you have to do is to press the multifunction touch button on any of the earbuds four times.

Mifa X180 Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in the Mifa X180, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Mifa X180 Manual | How to Charge

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Mifa X180 Manual | LED Light Status

Charging case

• One light on: 1% to 25% of the battery.
• Two lights on: 25% to 50% of the battery.
• Three lights on: 50% to 75% of the battery.
• Four lights on: 75% to 100% of the battery.

Mifa X180 Manual | How to Reset?

Step 1: Place both earbuds into the charging case.

Step 2: Press and hold the multifunction button on both earbuds for about 3 seconds.

 Step 3: When the lights on the charging case flash three times, and a red light turns on in the earbuds, the resetting will be done.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

Microphone not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

Mifa X180 earbuds not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Mifa X180 Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.

In case you want or need to contact the Mifa company, all your information can be found on its Contact Us page, where you can find numbers and emails available for several countries!