Home Audiophile Earbuds Manuals The Mifo S have 6-mic noise cancelling, the gaming and ANC modes, the IPX7 certification, a battery life of about 7 hours + 37 using the charging case, and much more. Learn how to use them with this new Mifo S Manual. What's Inside 1Mifo S Manual | Everything You Need To Know!Mifo S Manual | How to Pair / Connect?Mifo S Manual | How to Wear?Mifo S Manual | How to Turn On And Off?How to Control? / How to Operate? – InstructionsMifo S Manual | How to Activate Gaming Mode?Mifo S Manual | How to Activate Gaming Mode?Mifo S Manual | How to ChargeMifo S Manual | LED Light StatusMifo S Manual | How to Activate Mono Mode?Mifo S Manual | How to Reset?Some Common Earbuds Problems & TroubleshootingFAQs Mifo S Manual | Everything You Need To Know! Mifo S Manual | How to Pair / Connect? To iOS and Android phones Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 2: Go to the device’s Bluetooth settings. Step 3: Select “Mifo S”. If a password is needed, type “0000”. Step 4: After that, the pairing will be done. To PC (Windows) Step 1: Turn on Window’s Bluetooth. Step 2: Go to the settings. Step 3: Go to “Bluetooth and other devices”. Step 4: Click on “Add device”. Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Step 6: Select “Mifo S”. If a password is needed, type “0000”. Step 7: After that, the pairing will be done. Credits: sport-outdo.com Mifo S Manual | How to Wear? Step 1: Take both earbuds out of the charging case. Step 2: Identify the left and right earbuds. Step 3: Choose the ear tips that best suit your ears. Step 4: Insert the headphones into the inner canal of the ears. Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth. Mifo S Manual | How to Turn On And Off? Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically. Credits: Scarbir How to Control? / How to Operate? – Instructions Play or pause music: Press the multifunction touch button on any of the earbuds two times.Turn the volume up: Press the multifunction touch button on the right earbud one time.Turn the volume down: Press the multifunction touch button on the left earbud one time.Play the next song: Press the multifunction touch button on the right earbud three times.Play the previous song: Press the multifunction touch button on the left earbud three times.Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.End a current call: Press the multifunction touch button on any of the earbuds two times. Mifo S Manual | How to Activate Gaming Mode? To activate or deactivate the ANC mode in the Mifo S, all you have to do is to press and hold the multifunction touch button on any of the earbuds for about 1 second. Mifo S Manual | How to Activate Gaming Mode? To activate or deactivate the gaming mode in the Mifo S, all you have to do is to press the multifunction touch button on any of the earbuds five times. Credits: sport-outdo.com Mifo S Manual | How to Charge Earbuds To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically. Charging case To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically. Also, you can use a Qi Wireless charger. Mifo S Manual | LED Light Status Charging case One light flashing: The case has a low battery.One light is on: The case has 30% battery remaining.Two lights on: The case has 30% battery remaining.Three lights on: The case is fully charged.One light flashing with the earbuds inside: The earbuds have a low battery.One light is on with the earbuds inside: The earbuds have 30% battery remaining.Two lights on with the earbuds inside: The earbuds have 30% battery remaining.Three lights on with the earbuds inside: The earbuds are fully charged. Credits: sport-outdo.com Mifo S Manual | How to Activate Mono Mode? To activate or deactivate the mono mode in the Mifo S, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself. Mifo S Manual | How to Reset? Step 1: Delete all information of the “Mifo S” from the connected device. Step 2: Place the earbuds into the charging case. Step 3: Press the button on the charging case three times. After that, the resetting will be done. Credits: sport-outdo.com Some Common Earbuds Problems & Troubleshooting Left / Right / One side of the earbuds have stopped working If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following: 1. Try charging the earbud that is not working or both, placing them in the charging case. 2. Try factory resetting the earbuds. 3. Check if the earbuds are operating within a normal working range If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.See alsoAnker Soundcore Spirit X2 Manual | How To Pair? Gines·May 28, 2023 Left / Right / One side of the earbuds has a low volume If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following: 1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin. 2. Try factory resetting the earbuds. Microphone not working If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following: If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund. Mifo S earbuds not connecting to Windows/laptop/PC If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following: 1. Try disabling Bluetooth from nearby devices >>> then activate pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth, 2. Try uninstalling and reinstalling the Bluetooth driver, or update the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step. 3. Try resetting the earbuds. Credits: Scarbir FAQs Are Mifo S waterproof? Yes, the Mifo S are waterproof (IPX6 and up). They have a rating of IPX7, meaning that they not only are against water but they are also protected against the effects of immersion. Does Mifo S have a microphone? Yes, the Mifo S have an integrated microphone. Do Mifo S have low latency/gaming mode? Yes! The Mifo S have a low latency/gaming mode. Can Mifo S connect to PC and Laptop? Yes, the Mifo S can connect to PCs, laptops and tablets. Are Mifo S noise cancelling? Yes! These earbuds come with noise cancellation technology. How to know when Mifo S are fully charged? When the earbuds are charging, some lights will turn on in the charging case. When fully charged, all lights will be on. We hope you now know how to operate the earphone from the above Mifo S Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.