Monolith M-TWE Manual | Step-by-step Pairing & Troubleshooting

The Monolith M-TWE has Bluetooth 5.0, Sonarworks SoundID and EQ, Qualcomm aptX Audio, Qualcomm cVc 8.0 Echo Cancelling and Noise Suppression, Active Noise Cancelling, the IPX4 sweat and dust-proof certification, and more. Learn how to use them with this new Monolith M-TWE Manual.

Monolith M-TWE Manual | All You Need To Know!

Monolith M-TWE Manual | How to Pair / Connect?

To iOS and Android phones

Step 1: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing quickly, and they will turn on automatically.

Step 2: Press the multifunction touch button on any of the earbuds two times.

Step 3: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. After that, a white and red light will start flashing quickly.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Go to the device’s Bluetooth settings.

Step 6: Select “MP41500”. If a password is needed, type “0000”.

Step 7: After that, a white light will start flashing slowly, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing quickly, and they will turn on automatically.

Step 6: Press the multifunction touch button on any of the earbuds two times.

Step 7: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds. After that, a white and red light will start flashing quickly.

Step 8: Select “MP41500”. If a password is needed, type “0000”.

Step 9: After that, a white light will start flashing slowly, and the pairing will be done.

Monolith M-TWE Manual | How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

Monolith M-TWE Manual | How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a white light will start flashing quickly, and they will turn on automatically.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds two times.
• Play the next song: Press the multifunction touch button on the right earbud two times.
• Play the previous song: Press the multifunction touch button on the right earbud three times.
• Turn the volume up: Swipe up on the multifunction touch button on any of the earbuds.
• Turn the volume down: Swipe down on the multifunction touch button on any of the earbuds.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds two times.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 1 second.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

Monolith M-TWE Manual | How to Activate ANC and Ambient Mode?

To activate or deactivate the ANC and Ambient modes in these earbuds, all you have to do is to press the multifunction touch button on any of the earbuds one time.

Monolith M-TWE Manual | How to Activate Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Monolith M-TWE Manual | How to Charge?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

Monolith M-TWE Manual | How to Reset?

Step 1: Delete all pairing records of the “MP41500” from the connected device.

Step 2: Open the lid of the charging case and take the earbuds out. After that, they will turn on automatically.

Step 3: Press the multifunction touch button on any of the earbuds two times.

Step 4: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

Step 5: Press and hold the multifunction touch button on any of the earbuds for a couple of seconds, until a red light on the earbuds flashes three times.

Step 6: Place the earphones back in the charging case and leave them there for at least 10 seconds. After that, the resetting will be done.

Monolith M-TWE Manual | LED Light Status

Earbuds

• A white light flashing quickly: The earbuds are on.
• A white and red light will start flashing quickly: The earbuds are now in pairing mode.
• A white light flashing slowly: The earbuds are connected to the desired device.
• Two red lights flashing while on the charging case: The earbuds have between 0% and 49% of battery.
• A red light flashing slowly while on the charging case: The earbuds have between 50% and 99% of battery.
• All lights are off while on the charging case: The earbuds are fully charged.
• A red light flashing three times: The earbuds are resetting.

Charging case

• All lights on while charging: The case is fully charged.
• One light on while charging: The case has between 50% and 99% of the battery.
• Two lights on while charging: The case has between 25% and 50% of the battery.
• Three lights on while charging: The case has between 1% and 25% of the battery.
• All lights on: The case is fully charged.
• One light on: The case has between 50% and 99% of battery.
• Two lights on: The case has between 25% and 50% of battery.
• Three lights on: The case has between 1% and 25% of battery.

A Guide To Monolith M-TWE APP

The Monolith M-TWE can be used with an application, called SoundID. This application is available in the Apple Store and in the Play Store for iOS and Android devices.

• Step one: This is the introductory page of the application, where all the information you should know about it and all the features it provides to users will appear.
• Step two: You will need to log in with your Facebook profile, Google, or with your email in Email, to be able to save the information you put in the app.
• Step three: Once you have entered the application and logged in, the account configuration and customization process will begin. First of all, you will have to connect to the earbuds with the app, place their name, and accept them.
• Step four: Next comes a “Preference Test,” where the app will ask questions about sound to find the best technology for you.
• Step five: After that comes one of the most important parts, the “Hearing Test”, which will help establish the technology and make sure the earbuds are working properly.
• Step six: Finally, with the settings made, you can use the earbuds freely and whenever you want.

Some Common Earbuds Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> elect Bluetooth,

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Monolith M-TWE Manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.