Moondrop Space Travel Manual | All You Need To Know

The Moondrop Space Travel earbuds come with specs such as Bluetooth 5.3 with the A2DP/AVRCP/HFP/HSP audio formats, about 1.5 hours of charging time, a total battery life of up to 16 hours, the dust and sweat-proof IPX5 certification, ANC, Transparency mode, and Low Latency mode support, and much more. Learn how to use these earbuds using this Moondrop Space Travel manual!

If you are interested in purchasing these earbuds, you can easily do it using the Amazon online store. Also, in case you are interested in giving the original manual a look, you can do it here.

Moondrop Space Travel Specs Sheet

Model	Moondrop Space Travel
Weight	Earbuds: Around 4.2 grams each
Waterproof/IP ratings	IPX5
Bluetooth version	V5.3
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Audio Decoding	SBC, AAC
Driver	13mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 4 hours Charging case: Around 12 hours
Charging Time	Earbuds: Around 1.5 hours Charging case: Around 1.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next song, answer and end a call, voice assistant, place the current call on hold and answer a second call, switch between two calls, ANC, Transparency mode, Low Latency mode
Accessories	Charging case, USB cable, user manual, ear tips
Price	Around 25 USD

Moondrop Space Travel Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Ear tips.

Moondrop Space Travel Manual | Pairing & Charging Instructions

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Charging Case

• A white light on with the earbuds inside: The earbuds are charging.
• Said white light turns off with the earbuds inside: The earbuds are fully charged.
• An orange light on while charging: The case is charging.
• Said orange light turns off while charging: The case is fully charged

How to Reset And Re-Pair The Earbuds?

Step 1: Delete all pairing information about the Moondrop Space Travel earbuds on the device.

Step 2: With the earbuds out of the case, press and hold the touch sensor on both earbuds for about 8 seconds. The earbuds will clean the pairing information and restore the factory settings.

Step 3: Search for a new device.

Step 4: Select the Moondrop Space Travel earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically.

Turn Off

Automatically: Place the earbuds into the charging case. After that, the “Power off” voice prompt will sound, and the earbuds will turn off automatically.

How To Pair The Earbuds?

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

The “Du Du Du” voice prompt will sound, and they will now be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Moondrop Space Travel earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case and take the earbuds out. After that, the “Power on” voice prompt will sound, and the earbuds will turn on automatically and pair with each other.

The “Du Du Du” voice prompt will sound, and they will now be ready to pair with any device.

Step 7: Select the Moondrop Space Travel earbuds. If a password is needed, type “0000” or “1234”.

After that, the “Connected” voice prompt will sound, and the pairing will be done.

How To Disconnect The Earbuds?

Over-distance Disconnection

The earbuds will automatically disconnect from the device if they are beyond the effective working distance. You will hear the “Disconnect” voice prompt.

Manually disconnection

Press and hold the touch sensor on both earbuds for about 3 seconds. The earbuds will disconnect from the connected device.

Also, manually turn off the Bluetooth on the device.

How To Control These Earbuds?

NOTE: The touch sensor is placed on the upper part of the body of the earbuds.

• Play and pause a song: Press the touch sensor on any of the earbuds one time.
• Play the next song: Press the touch sensor on the right earbud two times.
• Play the previous song: Press the touch sensor on the left earbud two times.
• Answer an incoming call: Press the touch sensor on any of the earbuds one time.
• End a current call: Press the touch sensor on any of the earbuds one time.
• Reject an incoming call: Press and hold the touch sensor on any of the earbuds for about 1.5 seconds.
• Activate the voice assistant: Press the touch sensor on any of the earbuds three times.
• Place the current call on hold and answer a second call: Press the touch sensor on any of the earbuds one time.
• Switch between two calls: Press the touch sensor on any of the earbuds two times.
• Change between the ANC and Transparency mode: Press and hold the touch sensor on any of the earbuds for about 1 second (ANC>Regular mode>Transparency mode).
• Activate the Low Latency mode: Press the touch sensor on any of the earbuds four times.

The Earbuds’ Voice Prompts

• Power on: The earbuds turn on.
• Power off: The earbuds turn off.
• Du Du Du: The earbuds are ready to pair.
• Connected: The earbuds are connected.
• Disconnect: The earbuds are disconnected.
• Sh: The ANC mode is on.
• Eh: The regular mode is on.
• Heh: The Transparency mode is on.
• Game mode: The Low Latency mode is on.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

Do These Earbuds Have An App?

No, these earbuds don’t come with app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above Moondrop Space Travel manual. Want to know anything about the earbuds? Do not hesitate to ask in the comment section below.