Mpow Flame Solo | How To Use These Earbuds?

The Mpow Flame Solo come with specs such as the amazing IPX7 waterproof certification, Bluetooth 5.0, a battery life of about 7 hours + 21 hours using the charging case, fast-charging technology support, environmental noise canceling technology, a working range of about 10 meters, and much more. Learn how to use these earbuds using this manual!

Mpow Flame Solo | User Guide & Manual

How to Pair The Earbuds? Mode 1

To Android And iOS Devices

Step 1: Open the lid of the charging case and take the earbuds out. After that, a blue light will start flashing, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

A blue and red light will start flashing and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “Mpow Flame Solo” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: Open the lid of the charging case and take the earbuds out. After that, a blue light will start flashing, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

A blue and red light will start flashing and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “Mpow Flame Solo” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

How to Pair The Earbuds? Mode 2

To Android And iOS Devices

Step 1: With the earbuds out of the charging case, press and hold the multifunction touch button on any of the earbuds for about 5 seconds. The earbuds will turn on and enter pairing mode automatically.

A blue and red light will start flashing and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Turn on Bluetooth on the desired device.

Step 4: Go to the device’s Bluetooth settings.

Step 5: Select the “Mpow Flame Solo” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

To PC (Windows)

Step 1: With the earbuds out of the charging case, press and hold the multifunction touch button on any of the earbuds for about 5 seconds. The earbuds will turn on and enter pairing mode automatically.

A blue and red light will start flashing and the earbuds will be ready to pair with any device.

Step 2: Unlock the desired device.

Step 3: Go to the Settings.

Step 4: Go to “Bluetooth and other devices”.

Step 5: Turn on Bluetooth on the device.

Step 6: Click on “Add device”.

Step 7: Select the “Mpow Flame Solo” earbuds. If a password is needed, write “0000”. After that, the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case and take the earbuds out. After that, a blue light will start flashing, and the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

Turn off: Place the earbuds into the charging case. After that, the earbuds will turn off automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 5 seconds, and a red light will start flashing.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press and hold the volume up button on any of the earbuds for 1 or 2 seconds.
• Play the previous song: Press and hold the volume down button on any of the earbuds for 1 or 2 seconds.
• Turn the volume up: Press the volume up button on any of the earbuds one time.
• Turn the volume down: Press the volume down button on any of the earbuds one time.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for 1 or 2 seconds.
• Mute or unmute the microphone: Press and hold the volume up or down button on any of the earbuds for about 3 seconds.
• Activate the voice assistant: Press the multifunction touch button on any of the earbuds two times.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

How to Reset The Earbuds?

Step 1: Turn off Bluetooth on the connected device.

Step 2: Take both earbuds out of the charging case.

Step 3: Simultaneously, press and hold the volume up and volume down buttons on any of the earbuds for about 3 seconds. The paired information on the earbuds will be cleared and they will turn off.

What Do The Lights Mean?

Earbuds

• A blue light flashing: The earbuds turn on.
• A red light flashing: The earbuds turn off.
• A blue and red light flashing: The earbuds are now in pairing mode.

Charging case

• One light on while charging: The case has between 0% and 25% of battery.
• Two lights on while charging: The case has between 25% and 50% of battery.
• Three lights on while charging: The case has between 50% and 75% of battery.
• Four lights on while charging: The case has between 75% and 100% of battery.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Mpow Flame Solo manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.